Mustang convertible rear well molding and weatherstrip. If you Mustang Covertible is leaking or the molding has become rusted and brittle, look no further than the source for all of your Mustang Convertible needs.
This molding, along with a left hand molding, run around the rear of the convertible top from one rear door jam to the other. These are the moldings which attach to the body where the top meets the body.
This molding Is the piece that fits between the Upper Plastic Molding and the actual body of the car. It acts as a "gasket" To help seal the body and protect the upper molding from chafing against the body of the car.
This molding, along with a left hand molding, run around the rear of the convertible top from one rear door jam to the other. These are the moldings which attach to the body where the top meets the body.
This molding, along with a left hand molding, run around the rear of the convertible top from one rear door jam to the other. These are the moldings which attach to the body where the top meets the body.
These moldings, along with a right hand molding, run around the rear of the convertible top from one rear door jam to the other. These are the moldings which attach to the body where the top meets the body.
This molding Is the piece that fits between the Upper Plastic Molding and the actual body of the car. It acts as a "gasket" To help seal the body and protect the upper molding from chafing against the body of the car.
This molding, along with a right hand molding, run around the rear of the convertible top from one rear door jam to the other. These are the moldings which attach to the body where the top meets the body.
This molding, along with a left hand molding, run around the rear of the convertible top from one rear door jam to the other. These are the moldings which attach to the body where the top meets the body.
These moldings run around the rear of the convertible top from one rear door jam to the other. These are the moldings which attach to the body where the top meets the body.
This molding Is the piece that fits between the Upper Plastic Molding and the actual body of the car. It acts as a "gasket" To help seal the body and protect the upper molding from chafing against the body of the car.
These moldings run around the rear of the convertible top from one rear door jam to the other. These are the moldings which attach to the body where the top meets the body.
