A not uncommon occurrence for 94-04 Ford Mustang is for the electric fan wiring harness to overheat and melt. If this is the case for your 'stang replace it with this wiring harness assembly from Motorcraft.
This is the plug that typically melts down when the cooling fan starts going out. If your plug is melted, replacement of the cooling fan is also recommended.
Includes new fan motor plug assembly with pig tail wiring, hardware,
1995 Mustang w/3.8-liter or 5.0-liter engines: The engine-cooling-fan bearing can seize. Excessive heat may be generated, melting the fan-motor electrical connector, and possibly causing fan-motor components to ignite.
Check with your local Ford dealer to determine if your Mustang qualifies for the recall.
Whether you are looking for engine harness, fuel harnesses or just replacement oxygen sensor harnesses, 5.0Resto has you covered with a full selection of harnesses to ensure you don't spend all your time patching up a worn factory harness.
0:00:01 - 0:00:09 No matter what wiring project you have going on with your mustang, we have you covered with everything you need to get the job done right.
0:00:09 - 0:00:19 From complete engine conversion harnesses to factory correct restoration harnesses to the simplest of replacement connector pigtails, LatemodelRestoration.com has exactly what you need
Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
Pretty good except for instructions and connectors
Austin M. on
I bought this as well as a new cooling fan when my aftermarket fan wasn't cooling anymore. It comes with plenty of wire, and the heat wraps are great to keep water out. I only have 2 complaints about this product. 1 is that the instructions don't give you an actual wiring diagram for which wires connect to which pin. This was a small inconvenience since I didn't have the old fan or plug to compare to for the install and ended up having to call the dealership to get the correct order. 2 the butt connectors where too small for the wires, so I had to use different connectors that were a little bit bigger and made the heat shrink a little hard to get over them. But you can't beat the price, so I would still recommend it.
Yes, I would recommend this item to a friend!
Was this review helpful to you?
just what I needed
eduardo baez on
The fan motor on my car was busted, as well as the connector, and around here was either not in stock or was too expensive. LRS once againwent to my rescue. Thanks!
Ford Motor Company Genuine Parts, Motorcraft® Parts and Ford and Motorcraft Remanufactured Parts are all excellent choices when it comes to performance, longevity and value for your Mustang or SVT Lightning. And they’re all backed by a Ford Motor Company limited parts warranty*, so you know their parts you use are going to perform like they should. Put the same parts on your Lighting & Mustang that came from the factory! Shop LatemodelRestoration.com for Motorcraft oil, oil filters, friction modifier, spark plugs, and many other replacement maintenance items!