Adds Newer Style Wheel Look Without Converting To 5 Lug
Fits Factory 4 Lug Applications
Saleen SC Wheel Styling
1 Piece Cast Aluminum Construction
Weight 24 lbs
What's in the Box
(4) 17x8 Chrome SC Style Wheels
Diameter 17"Width 8"Lugs 4Offset +19 mm.Backspacing 5.5 in.Bolt Circle 4.25 in.
Saleen SC Styling For Your Fox Body
There really hasn't been a new style 4 lug wheel since the Cobra R's were released in the late 90's. Until now! LRS is proud to offer the popular design of the Saleen SC wheel and made a wheel that 1979-93 Foxbody Mustang fans can enjoy. These wheels are 17x8's that come finished in Chrome and are designed to be a direct bolt on for 1979-93 V8 4 lug Mustang applications.
SC Wheel Kit
This kit includes 4 chrome 17x8 SC wheels to give your 1979-1993 Fox Body custom new looks. We have put together this kit for Foxbody owners who want new wheels, but do not want the same popular aftermarket wheels. Being a 4 lug wheel, you do not have to switch over to a 5 lug setup to upgrade your exterior! Pair it with a set of Nitto tires and chrome lug nuts for a quick and easy install!
Upload your own picture of the Mustang SC Wheel Kit - 17x8 Chrome (79-93)
Please make sure to hold your device horizontally (like a camera) rather than vertical (like a phone).
By uploading an image, you agree to give LatemodelRestoration.com® permission to use it in future advertisements and promotions.
The wheel size is the diameter of the wheel, in inches, not counting the tire.
Modern tires in North America have several other measurements associated with their size.
A tire designated as a "225/70R14" denotes a tire with the following dimensions: width of tread: 225 mm; ratio of tire height to width: 70 percent; rim diameter: 14".
Therefore a 185/70R14 has the same rim diameter and aspect ratio, but a smaller overall diameter and narrower tread face than the 225/70R14.
The easiest way to measure backspace is to lay the wheel face down onto the ground so the backside of the wheel is facing up.
Take a straight edge and lay it diagonally across the inboard flange of the wheel. Take a tape measure and measure the distance from where the straight edge contacts the inboard flange to the hub mounting pad of the wheel. This measurement is the backspace.
The photo below shows three wheels with 2", 3", & 4" backspace.
Wheel Bolt Circle
The bolt pattern or bolt circle is the diameter of an imaginary circle formed by the centers of the wheel lugs. Bolt patterns can be 4, 5, 6, or 8 lug holes. A bolt circle of 4x100 would indicate a 4 lug pattern on a circle with a diameter of 100mm.
The diagram indicates the proper measuring methods. 6 lug wheels are measured like the 4 lug wheels.
The offset, measured in millimeters, can be negative or positive, and is the distance from the hub-mounting surface to the rim's true centerline. A positive offset means the hub-mounting surface is closer to the outside edge of the wheel; a negative offset means the hub-mounting surface is closer to the inside edge of the wheel. Offset affects the scrub radius of the steering and it is advisable to stay within the limits allowed by the vehicle manufacturer. If tires are fitted which are significantly wider than those specified by the manufacturer, a compromise may have to be adopted whereby a wheel with less offset is used to prevent the tire rubbing on the suspension.
Wheel Lug Pattern
Wheel lugs or bolt pattern is merely the number of bolts or lugs on the wheel. As the bolts will be evenly spaced, the number determines the bolt pattern. For example, most U.S. passenger cars have 5 bolts while compact models sometimes have only 4 and pick-up trucks can have as many as 6 or 8.
EFI Proline 351, Dyno 530hp,600lbs tq, fun car. Basically the entire powertrain is aftermarket, from the ford racing rear end to the custom cold air intake. I've always wanted to own one since I was a...