This part is 50-state legal - CARB E.O. #: D-213-27
V-2 Si-Trim Supercharger Kit
Get your 01 Bullitt Mustang some Boost with a Supercharger kit by Vortech from LatemodelRestoration.com. Safely increase your Bullitt's horsepower from 265 to 390 and torque from 305 lb./ft. to 396 lb./ft. This is a fully integrated system to add horsepower to your Bullitt Mustang. Vortech has engineered this system to fit as if it werde factory installed while adding power gains to your Bullitt.
Will the Mustang Vortech V-2 Si-Trim Supercharger Kit Satin (2001) 4.6L work with my 78mm throttle body intake plenum. I would like to know before I spend a hell of a lot of money. Thank you for your time Tim Kirby Asked by Timmy K.from Olean | Comment00
Best Answer: When you say 78mm, are you running the BBK branded throttle body on a GT intake manifold? Answered by Karson S.from Hewitt | 1 Comments00
Gotcha. This particular kit is for the bullitt intake that has an elbow on it with the throttle body facing towards the front of the car. If you are running a GT manifold with the bbk throttle body, the kit you will need is part number VOR-4FL218130L. The boot supplied should fit over your throttle body opening just fine.
Established in 1990, Vortech Engineering, LLC offers a variety of automotive performance products including complete supercharging systems, fuel system components and air-to-water aftercoolers for your Mustang or Lightning. Vortech has also consistently earned praise from the automotive press for its premier centrifugal supercharging systems and performance enhancing parts and accessories. Get the right supercharger system or components for your 1986-2014 Mustang today at LatemodelRestoration.com!
Products by Vehicle
Email Me When It's Back In Stock!
Email Me When It Arrives!
Upload a Picture
Upload your own picture of the Mustang Vortech V-2 Si-Trim Supercharger Kit Satin (2001) 4.6L
Please make sure to hold your device horizontally (like a camera) rather than vertical (like a phone).
By uploading an image, you agree to give LatemodelRestoration.com® permission to use it in future advertisements and promotions.
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!