Video: Mustang Vinyl Decal Installation
Published on 2013-10-18
Never installed a set of vinyl decals on a car before? Watch this installation video as Jmac walks you through the simple steps needed to install a decal on your Stang. We offer a full selection of SVE decals for your Mustang and SVT Lightning. Be sure to check out the link above to see a full selection of decals, stripes and graphics available for your ride!
Fender Hash Marks
tail light decals & tint
body stripe kits
C Stripes - Boss 302 style
Body molding stripes
and plenty more!!!
Jmac: If you've ever wondered how difficult it is to install a set of vinyl decals on your Mustang, we're going to show you just how easy it is by installing set of our tail light decals on this 2012 Mustang. Couple of things you're going to want to have plenty of is time, patience, and also one of our SVE decal installation kits.
You'll want to start out with this area clean, so if you need to wash your car before hand, go and do that. Start by eyeballing your decal and trimming it before installation. For this particular decal, I trimmed closely along the bottom edge for a baseline and then trimmed out inside the reverse light openings for proper positioning.
Peel the protective backing off. Spray the decal with the SVE decal solution. Lightly apply the decal in place, properly align it, and start using the squeegee in the SVE decal installation kit to smooth all the water out from behind the decal.
Let it dry for 15 to 20 minutes, squeegee begin, and carefully start peeling back the adhesive paper. Keep your squeegee at hand, and wipe over the decal slightly if needed.
Fully remove the adhesive paper, wipe down over the entire decal, and work out any air bubbles. Any small air bubbles that remain, don't worry. They'll come out after a few days in the sun.
And there you go. Time, patience, and the right tools, you can have any decal kit installed on your Mustang in no time at all. Check out latemodelrestoration.com's full line of decals for 1979 to present Mustangs today.