Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
looking to upgrade to a bigger radiator for WRL endurance racing. 92' Fox that we put an aftermarket (used) 94-95 3 core radiator in. It was full of stop leak so didn't work well. We have a very mild to almost stock 302 carb motor in the car. What's the book say on HP rating for this radiator as an alternative?
Asked by William S. from Crosby | Comment 0 0
There are a lot of variables that can dictate the efficiency of a cooling system. I've personally seen these radiators perform effectively in street cars with well over 400 horsepower. The additional demands from endurance racing may be a different story. I would recommend installing a fox body radiator if your car will still accommodate one. Fox body radiators are larger, therefore higher capacity.
Answered by scott s. from hewitt | Comment 0 0
The radiator mounts for our 1994-95 SVE radiator can be found via this link. http://www.latemodelrestoration.com/item/MIS-RADMOUNT94/1994-1996-Mustang-Radiator-Brackets
Answered by John J. from Hewitt | Comment 0 0
Justin, you can use this SVE radiator on your 1995 Sn 95 Cobra with no issue. This is intended to be a drop in replacement to the factory unit.
Answered by Tommy E. from Hewitt | Comment 0 0
that radiator will work very nicely for your Mustang. You might want to look into upgrading the cooling fan or looking into one of our adjustable fan controllers so that you can change when the fan activates and helps keep everything cool
Answered by Trey P. from Lorena | Comment 0 0
This core thickness is 2''. One of our shop cars is running this radiator and still has ABS and all fits fine. I do recommend part number MIS-RADMOUNT94 for installation.
Answered by Karson S. from Hewitt | Comment 0 0
Ford Mustang - 1994 (94) - 1995 (95)