SVE Mustang Performance Suspension Kit
This SVE 2011-2014 Mustang performance suspension kit is a great way to get your S197 handling better both on and off the track. We have put together our top 11-14 Mustang suspension upgrades in one easy to install kit to save you time and money on your S197! This kit includes SVE rear lower control arms, a set of SVE lowering springs, Eibach camber adjustment bolts, and an adjustable panhard bar.
SVE Rear Lower Control Arms
This is a pair of SVE billet aluminum rear lower control arms for the 2005-2014 Ford Mustang. Made from durable 6061-T6 aluminum, these control arms are designed to help eliminate annoying wheel hop and stabilize your rear end to get you down and around the track faster. They come with Energy Suspension urethane bushings for a life time of use and simply bolt in place of your existing control arms with no modifications needed. Made in the U.S.A!
SVE Lowering Springs
These 2005-2014 Mustang progressive rate lowering springs from SVE are a great way to improve the handling in your S197. By installing these springs, you lower your vehicles center of gravity which reduces squat during acceleration, body roll while cornering, and excessive nose diving under hard braking conditions. This kit is perfect for daily driving, road racing, and drag racing. With a drop of up to 1.4" in the front and a drop in the back of up to 1.5", your S197 will look and handle way better than stock!
Eibach Camber Adjustment Bolts
Get your lowered 05-14 S197 Mustang aligned correctly with Eibach's camber adjustment bolts. Reduce uneven tire wear, correct ill handling and braking and get the job done right the first time. Eibach's adjustable camber bolts allow you to dial in your suspension whether on the street or on the track for maximum performance. Get yours and get lined up today!
Allows an extra +/- 1 degree of camber to dial in your front end alignment.
J&M Adjustable Panhard Bar
Improve handling on your 05-14 Mustang and eliminate the unwanted flex and twist commonly found with the poorly designed factory panhard bar. The J&M Mustang Adjustable Panhard Rod keeps the rear axle located in the optimum position under the rear of the car, dramatically improving cornering and overall handling. You can easily fine tune your suspension with the Panhard bar installed on your mustang just by turning a wrench, no need to remove it to make adjustments.
Need help installing lowering springs on your 05-14 Mustang? Follow along in this video as Jmac shows you how to lower your Mustang with a set of our SVE Lowering Springs. These high quality performance springs will improve your handling. They are progressive rate springs designed for aggressive styling without sacrificing ride quality. They will lower your Stang roughly 1"-1.5". They are made in America and feature a 1 million mile warranty!!!
The installation process is the same for all other lowering springs such as Eibach Pro-kit, Sportlines, Ford Racing, H&R, Steeda and more. This same process can be used to help you install coil over kits as well.
If you have lowered your Mustang, and you're having problems with getting the alignment back to spec, then you need to pickup a set of Eibach Camber Adjustment Bolts for your S197 Mustang. This product allows an extra +/- degree of camber to dial in your front end alignment.
In this video we explain how to install this product. We also go over how to add positive or negative camber depending on what your front end alignment calls for.
If you've lowered or plan on lowering your 2005 to 2014 Mustang, the first thing that comes to mind is your front-end alignment. Regardless of how low your Mustang is, now would be the perfect time to purchase a set of Eibach camber bolts from LateModelRestoration.com. These camber bolts feature quality construction, prevent uneven tire wear, and also allow for a positive or negative one-degree of camber to get your front-end alignment dialed in.
Now let's go ahead and jump over here to this 2007 Mustang and let me show you how easy this install is. Start by jacking up the car and placing a jack stand underneath for safety. Remove your lugs from the wheel and get it out of your way. Remove the top spindle-to-strut bolt from the car using an 18-millimeter deep socket and 21-millimeter shallow socket. Loosen the bottom spindle-to-strut bolt using the same socket selection.
Notice the small tab on the washer. This will sit on the flat side of the cam bolt when you slide it through the strut-and-spindle. The larger tab is to determine your camber adjustment. The larger tab should point toward the outside of the car for positive camber and point toward the engine for negative camber. Snug down the camber adjustment bolt with an 18-millimeter deep socket and 15-millimeter shallow socket, but do not tighten.
Using a torque wrench, torque both nuts to 97-foot pounds. Remount your wheel and tighten down your lugs. We just finished up the installation on our Eibach camber adjustment bolts. Each side took us roughly 30 minutes, so about an hour total of your time and it can be done in your driveway. Now once you get yours installed, we do recommend you take it to an alignment shop and have it professionally-aligned. For more Mustang how-to, subscribe to our YouTube channel or check out our great selection of suspension parts at LateModelRestoration.com.
I purchased the SVE handling pack along with the 20" staggered Downforce wheels with Nitto's and Gt 500 axle backs in June for my 2014 GT.....Tires, wheels and exhaust were installed right away but the opportunity to install the springs didn't come until this weekend..Took my son and I about 3 hours to do the install in my driveway..Simple and straight forward with ZERO issues..The stance is spot on and looks great ..The first thing I noticed when I drove it was the ride quality..Firm and precise ..I was expecting it to be somewhat harsh but it actually rides better than with the stock springs in my opinion..The lower control arms work great and look awesome as well...My hats off to LMR for a great product ..Thanks
SVE, or Special Vehicle Equipment, is your trusted source for 1979-93 Mustang Foxbody, 1994-98 Mustang SN95, 1999-04 Mustang New Edge, or 2005-present Mustang S197 performance and styling products. Buy SVE products from Latemodel Restoration Supply and receive the best value and quality, with industry-leading customer service. Whether you need Mustang wheels, Mach1 chin spoilers, control arms, subframe connectors, clutches, lowering springs, cold air intake kits, or big brake kits, SVE is the brand you should demand.
SVE and 50resto Warranty
One Year Hassle Free Replacement
SVE and 50resto products are warranted to be free from defects in materials or workmanship for one year from date of purchase. What does this warranty cover? YOU! That’s right, whether you ordered a SVE brand Mach I grille delete or a 50resto brand light kit, if your product fails within a year of your purchase we got your back! Some conditions will apply.