High Flow H-Pipe
Add horsepower and be emission compliant with this 2.5 " H-pipe & mini cat kit from LatemodelRestoration.com. Now you can make more power unrestricted by poor flowing catalysts and H-pipes. The SVE direct replacement H-pipe is designed to bolt to your factory or aftermarket shorty headers and cat back system. Plus, we added a pair of Flomaster Universal mini cats to make you emission compliant so keeping up with pollution and smog rules can be followed. Get more from your 5.0 Mustang and do it legally with this kit!
***Universal Cats are 49 state Legal and not for sale or use in California***
You must have an exhaust shop cut the H-pipe and weld in the catalytic converters to the front section.
Product: 1986-93 MUSTANG 2.5" OFF ROAD H-PIPE Part #: SVE-5250B Brand: SVE Fits: Ford Mustang 5.0L GT & LX Year Models: 1986 (86) - 1987 (87) - 1988 (88) - 1989 (89) - 1990 (90) - 1991 (91) - 1992 (92) - 1993 (93)
In this video Jmac introduces you the high quality and very affordable SVE 86-93 Mustang 2.5" Off Road H Pipe. This three (3) piece design Mustang offroad h pipe is easy to install and includes all the fittings and hardware needed for installation. The SVE off road h pipe is the perfect way to complete your Project Fox Body Mustang exhaust system. The SVE off-road h pipe also comes in a kit form that includes the 5.0Resto exhaust hanger or Flowmaster high flow cats (catalytic converters). If you need help passing the exhaust inspection test, Jmac also discusses the Flowmaster high flow catalytic converters. These can be added the SVE H Pipe to help pass visual exhaust inspection.
Add an off road H-pipe to your 86-93 Mustang Fox Body for more horsepower and better sound plus, get the hanger to make your installation complete! Looking for a quality H-pipe without breaking the bank? Look no further that this SVE Off-Road H-pipe for 1986-1993 Mustangs. These SVE direct replacement H-pipes feature 2.5" diameter aluminized tubing for maximum flow and horsepower. This SVE full length H pipe is designed as direct bolt on to 86-93 Mustangs with factory headers or any aftermarket shorty headers. It is also a great upgrade when converting 1979-1985 Mustangs to a true dual exhaust conversion. This SVE H-Pipe in a modular 3 piece design for an easy bolt-on installation and features the OEM-Original O2 sensor locations as well as factory style die-stamped flanges ensure a perfect fit. It also comes with the Mid-Pipe hangers and air tube provision pre-installed!
SPEAKER: If you wanted to add a little bit of grunt and a lot of sound to your '86 to '93 Mustang five liter, we've got you covered with this SVE Off-Road H Pipe. Now, this H pipe is made out of 2 and 1/2 inch alumni steel pipe, features correct O2 sensor bungs, correct hangers, small tube hook up, ball and socket fittings for a leak free fit, and all needed installation hardware. Because this is an off-road pipe, it is not legal for sale or use on pollution controlled motor vehicles in the US.
But let's say you actually do drive your Mustang on the street. Well, Flowmaster comes to the rescue with a set of their high flow catalytic converters. A quick trip to your exhaust shop, they can be welded in, and you'll have yourself an economical, read, wallet friendly catalytic H pipe that'll get you past visual and sniffer inspection.
This H pipe is available on its own or in a kit with our 5.0 Resto exhaust hanger. This exhaust hanger is typically missing, rusted, or the bushings are completely beat out of it. And it is a needed component to make sure that your exhaust hangs exactly where it needs to.
The fit of this H pipe is great. Don't let the price fool you. This thing is awesome. It goes with factory shorty headers or any of your aftermarket shorty headers that are intended to replace the stock shorties. Installation is fairly simple. It can be done in your driveway with a jack, jack stands, and some common hand tools, and won't take you more than an afternoon.
For more exhaust modifications for your late model Mustang, check out LatemodelRestoration.com.
Flowmaster's high flow mini catalytic converters are the perfect solution to any Mustang exhaust system that is in need of high flow cats to stay emissions legal. They are available in both a 2.5" (inch) and 3" (inch) design. These Flowmaster Catalytic Converters, often referred to as "high flow cats", are a universal design that can be added to any Mustang exhaust system. If you currently have an off road h or x pipe on your Mustang, these Flowmaster catalytic converters can bring your exhaust back into most state's emission compliance. Best off all their high flow characteristics won't rob you of horsepower hp like your factory catalytic converters. They are also engineered to keep the MIL Check Engine light off in your Mustang.
The Flowmaster High Flow Catalytic Converters are constructed out of stainless steel and they are manufactured in USA. They are a great addition to any Cobra Mustang exhaust system, Mustang GT exhaust system or V6 Mustang dual exhaust conversion. So whether you are working with a fox body mustang 5.0 or 2011 Mustang 5.0 coyote car these will be a great fit for you!
With simple modification done at an exhaust shop or welder, these Flowmaster catalytic converters will work on any Mustang Exhaust System: GT, LX, SVT Cobra, Mach 1, Shelby GT500, Bullitt, v6, SVO
0:00:01 - 0:00:09 If your mustang is equipped with an off road mid pipe don't worry Flowmaster has you covered with their universal mini catalytic converters.
0:00:09 - 0:00:31 Now these converters feature a spun stainless steel body that is 10.5 inches long and four inches in diameter. It is available in both 2.5 inch inlet and outlet versions and 3" inlet and outlet versions. This are 49 state legal not legal for sale or use in California but in all the other states it will get you back into emissions compliance.
0:00:31 - 0:00:34 It will require trip to the exhaust shop so they can cut your existing mid pipe and weld these into place check out LatemodelRestoration.com for more exhaust solutions for your mustang.
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!