SVE 5 Lug Conversion w/ Drag Wheel & Tire Kit
This all in one kit gets your 1987-1993 Foxbody Mustang looking, performing, and driving like never before. This kit includes our SVE 5 lug conversion that has everything you need to swap out your 4 lug axles & rotors for a stronger 5 lug set up. Also included in this kit is a set of SVE drag wheels & tires. These drag wheels and tires are perfect for your track days as they are lighter wheels and the rear drag radials provide much needed traction. Pick up this complete kit for your 87-93 Mustang today and transform the look of your Fox Body!
5 Lug Conversion
This kit has EVERYTHING you need to convert your 1987-93 Mustang 5.0L to five lug the right way! This complete 5 lug swap kit allows you to run better wheels, brakes, and not to mention more horsepower!
These name brand Mustang axles are stock length 31 spline, with a 5" x 4.5" bolt pattern. They are made from high quality steel & hardened to increase torque capacity 25% over a stock axle!
1979-86 Mustangs and 1987-93 2.3L Mustangs need to use 1987-93 5.0L spindles, struts, and calipers for this kit to work.
SVE Drag Wheels
This Mustang SVE drag wheel and tire kit is a great way to get your drag car ready for the track! The gloss black drag wheel and tire kit features 15X10 and 15X3.75 wheels to give you stunning good looks and great performance! We have refined this wheel by making installation hassle free by utilizing a hub centric wheel. No washers to lose or shank lugs to complicate bolting them on, simply use acorn style nuts for quick changes at the track.
To help you get the most performance out of your Mustang, we have paired up the perfect tires in this SVE drag wheel and tire kit! This kit includes 2 165/80/R15 Cordovan Classic tires to keep your front end light, and 2 275/50/15 Mickey Thomson ET Street Radials for more traction. This kit comes mounted and balanced ready to be bolted onto your Mustang!
- Fits 1987-1993 Mustangs
- This Kit Is A Direct Fit For Included Components
- Upgraded Brakes May Not Clear
Video: Installing SVE Drag Wheels on a Fox Body Mustang
Published on 2013-09-12
Watch as we install a set of 15x10 SVE Drag Wheels on this Fox Body Mustang. See what modifications are needed for clearance with 275/50/15 tires. The perfect set up for a weekend of drag racing in your Stang!!
We're going to show you what it takes to put a set of SVE drag wheels on your '87 to '93 Fox Mustang. First thing you'll need to do is convert to five lug using something like our Fox style rotor and drum five lug conversion kit, available at latemodelrestoration.com.
The 15 inch wheels will bolt right on over the Fox style rotor conversion, along with the SN95 '94 to '04 V6 and GT brakes. If you're running SN95 Cobra brakes, you will need 17 inch front wheels.
To fit a 15 x 10 with a 275 50 15 tire on the back of your Fox, you will absolutely have to remove the quad shock. Then you can mount the wheel up and lower the car down to ride height, and check the inner wheel well for clearance. Every car is a little different, and on ours, we did have to massage the front inside of the wheel well.
The outer fender lip will need to be rolled. There's several different ways to do this. Pick your poison. Just be sure not to mess up your paint.
Bolt your wheels up, and enjoy the aggressive look that set of SVE drag wheels will give your Fox Mustang.
Want to take advantage of more wheel options for your 79-93 Mustang? Then you need to pick up a 5 lug conversion kit from LatemodelRestoration.com. We are the Fox Mustang experts and we have taken guess work out of 5 lug swaps. Our complete kit features everything you need to start running the more popular 5 lug aftermarket and factory wheels on your Stang! Best of all, these aren't junkyard parts. All parts are brand new!
Follow along in the video as we show you how to install our 4 to 5 lug conversion kit. Our complete Fox Body 5 Lug Swap Kits are available in 28 spline and 31 spline axle versions. We also have front and rear conversions as well.
0:00:00 - 0:00:31 There are more ways to convert your 87-93 Fox Body Mustang to 5 lug than you can count on one hand. One of the many ways is this Fox style five lug conversion kit from LatemodelRestoration.com. It uses Fox style 5 lug front brake rotors Fox length rear axles with 5 lug brake drums that are compatible with your stock rear drum brake setup. It also includes the needed axle studs, front wheel bearings, grease seals, gear oil, just about everything you need so you can throw it on your car. We’re going to show you step-by-step what's required to install this on your 87-93 Mustang.
0:00:31 - 0:01:06 To start out our 5 lug swap, support your car in the air and remove all the wheels. We'll begin with the front by removing the brake caliber. Pop off the dust cap. Remove the cotter pin, nut retainer, nut spacer washer and outer wheel bearing. You can then slide your old rotor of the spindle. Go ahead and clean up all the old grease off the spindle as well as of the nut, spacer washer out of the grease cap and the retainer. Grab your new rotor.
0:01:06 - 0:01:47 Wipe down there bearing races with brake cleaner. Pack the area in between the bearing races with grease and smear some grease on the bearing races. Pack your wheel bearings with your choice a wheel bearing grease. We decided to use Royal Purple. Install you’re inside wheel bearing followed by the new grease seal. Smear some grease on the spindle. Slide the rotor into place. Slide in your outer wheel bearing, followed by the spacer washer and nut. Tighten and loosen the retaining nut several times while rotating the rotor to fully see the bearings.
0:01:47 - 0:02:223 Once you feel the bearings are fully seated. Tighten the nut and loosen it by one flat. Rotate the nut retainer around until it you can clearly see the cotter pin hole. Install your cotter pin. Pack some new grease inside the bearing dust cap. Install the cap into the brake rotor. Slide you caliber back into place and bolt it down. Repeat this for the other side. Moving on to the rear. Remove the 10 cover bolts. You will want to grab you an oil drain pan and remove the rear cover.
0:02:23 - 0:02:53 Slide your drums off. Rotate your axle around to where you can access the cross pin retaining bolt. Remove the cross pin retaining bolt. Remove the cross pin. Slide one axle inward and remove the c clip. Do this for the other side. Remove both rear axles. Grab your new axles and the included 10 wheel studs. There are several different ways to install these wheel studs. The tried and true method is to hammer them into place. When using the stock wheel studs it doesn't take a whole lot of effort.
0:02:53 - 0:03:17 If you're using aftermarket style ARP long wheel studs, you will need to enlarge the holes on the axle flange and use a hydraulic press. Slide your new axles in the housing being careful not to damage the outer oil seal. Slide 1 axle all the way inward. Engage the c clip and push it back out till it locks in place. Do this for the other axle. Reinstall your cross pin and the cross pin retaining bolt.
0:03:17 - 0:04:00 Thoroughly clean the face of the axle housing along with the differential cover. We always recommend using one of our reusable differential gaskets. Now we don't have any RTV silicone mess. Reinstall the rear differential cover. Tightening down all 10 bolts. Remove the fill plug from the front axle housing. Start filling the housing with oil. On the second bottle I normally put in about half the bottle. Then add the bottle of Ford Racing friction modifier to the remaining half bottle of oil. Finish filling the axle. Apply some thread sealer to the fill plug and reinstall the fill plug. Slide your new brake drums into place.
0:04:00 - 0:04:23 Install your new wheels and lower the car onto the ground. Of course the perfect finishing touch to any 4 to 5 lug conversion is a new set a 5 lug wheels. We chose to go with a set of our chrome SVE Drag Wheels. Man do they look MEAN! Check out LatemodelRestoration.com to pick up your five lug conversion kit and to see the full list of wheel fitments for this particular kit.
15x3.75 SVE Drag Wheel (94-10 Mustang) 17x4.5 SVE Drag Wheel (94-14 Mustang)
Rear Drag Wheels
15x10 SVE Drag Wheel (94-04 Mustang & 05-14 Mustang)
They come in three unique finishes, dark stainless, chrome & black, to ensure you have still have killer looks while sitting in line at the drag strip. Best of all these wheels clean up easily with a simple wipe down with a microfiber towel and detailing spray. No more polishing drag wheels all night before the races!!
Visit www.LatemodelRestoration.com for all your Ford Mustang & SVT Lightning parts! For More Tech articles and videos videos visit: http://www.latemodelrestoration.com/products/Mustang-Tech-News ------------------------------------------------------ Want to see your ride featured on our social media platforms? Post up a picture on our Facebook, Instagram, Twitter or Google+ account and tag your picture with #latemodelresto ------------------------------------------------------ http://instagram.com/latemodelresto https://www.facebook.com/latemodelresto https://twitter.com/latemodel_resto
Jmac: If you have a straight-line oriented Mustang, then you need a set of our SVE drag wheels. The one-piece cast aluminum construction allows for less rotational and unsprung weight over most street wheels, and the 5 on 4 and 1/2 inch bolt pattern accepts OE-type acorn lug nuts. Finishes available are gloss black, chrome, and hypercoat. They're available individually, as well as already mounted up and balanced in a wheel and tire kit.
Rear sizes are 15 by 10. Front sizes are 15 by 3 and 3/4, and 17 by 4 and 1/2, with offsets to fit your '94 to 2014 Mustang. And don't worry, any of you Fox guys that have a five lug conversion, the '94 to '04 style will work just fine for you. Check out the product page on our website for specific fitment notes, as well as any restrictions. And stop on off at latemodelrestoration.com before your next trip to the drags to pick up a set of these SVE drag wheels for your Mustang.
SVE, or Special Vehicle Equipment, is your trusted source for 1979-93 Mustang Foxbody, 1994-98 Mustang SN95, 1999-04 Mustang New Edge, or 2005-present Mustang S197 performance and styling products. Buy SVE products from Latemodel Restoration Supply and receive the best value and quality, with industry-leading customer service. Whether you need Mustang wheels, Mach1 chin spoilers, control arms, subframe connectors, clutches, lowering springs, cold air intake kits, or big brake kits, SVE is the brand you should demand.
SVE and 50resto Warranty
One Year Hassle Free Replacement
SVE and 50resto products are warranted to be free from defects in materials or workmanship for one year from date of purchase. What does this warranty cover? YOU! That’s right, whether you ordered a SVE brand Mach I grille delete or a 50resto brand light kit, if your product fails within a year of your purchase we got your back! Some conditions will apply.
Well me and my girlfriend had a day off and decided to take a road trip to Late Model Restoration. Let me tell you, we had the best CUSTOMER SERVICE ever. Jay was very helpful and knowledgeable about the parts I purchased. The showroom was clean and inviting. Also I got to meet JMAC that host's all of their YouTube videos. They also had project BLUE COLLAR in the parking lot, and it is NICE. I will recommend Late Model to everyone I know...