Dual Hood Stripe Kit
This black SVE dual Mustang hood bulge stripe decal kit is a great addition to any 2010-12 Mustang and gives it a custom look and feel. This decal set is designed to be applied to the Hood Bulge of your 2010-12 Mustang as a throw back styling cue of the Early 70's. It is made from high quality vinyl and is built to last! This sticker kit is easy to apply and can easily transform the exterior look of your S197 Mustang!
-Fits: 2010-12 Mustangs
-Dual stripes cover bulge section of hood only.
-For non scooped hoods only.
Never installed a set of vinyl decals on a car before? Watch this installation video as Jmac walks you through the simple steps needed to install a decal on your Stang. We offer a full selection of SVE decals for your Mustang and SVT Lightning. Be sure to check out the link above to see a full selection of decals, stripes and graphics available for your ride!
Fender Hash Marks Bumper inserts tail light decals & tint hood stripes body stripe kits C Stripes - Boss 302 style Body molding stripes fender decklid windshield hood scoop side stripes and plenty more!!!
Jmac: If you've ever wondered how difficult it is to install a set of vinyl decals on your Mustang, we're going to show you just how easy it is by installing set of our tail light decals on this 2012 Mustang. Couple of things you're going to want to have plenty of is time, patience, and also one of our SVE decal installation kits.
You'll want to start out with this area clean, so if you need to wash your car before hand, go and do that. Start by eyeballing your decal and trimming it before installation. For this particular decal, I trimmed closely along the bottom edge for a baseline and then trimmed out inside the reverse light openings for proper positioning.
Peel the protective backing off. Spray the decal with the SVE decal solution. Lightly apply the decal in place, properly align it, and start using the squeegee in the SVE decal installation kit to smooth all the water out from behind the decal.
Let it dry for 15 to 20 minutes, squeegee begin, and carefully start peeling back the adhesive paper. Keep your squeegee at hand, and wipe over the decal slightly if needed.
Fully remove the adhesive paper, wipe down over the entire decal, and work out any air bubbles. Any small air bubbles that remain, don't worry. They'll come out after a few days in the sun.
And there you go. Time, patience, and the right tools, you can have any decal kit installed on your Mustang in no time at all. Check out latemodelrestoration.com's full line of decals for 1979 to present Mustangs today.
Video: Mustang SVE Decal Application Kit & How to Install
Published on 2014-10-17
Applying decals on your Mustang or Lightning can be made simple with our SVE Decal Application Kit. This kit includes an application spreader and spray bottle with solution so you can achieve that professional look.
When applying decals from latemodelrestoration.com, a great thing to have is our SVE decal application kit. Our kit includes your application solution and squeegee to make install a breeze.
Now before you begin applying your decal, you want to make sure you clean your surface well. That way the decal will adhere properly. Once you've wiped your surface clean, then you can go ahead and mark the area where you're going to apply the decal, and remove it from its backing paper. Once you've removed the backing paper, go ahead and take your application solution, liberally spray your marked area, and the back of the decal.
Lay the decal on the surface. Go ahead and squeegee out any remaining solution or bubbles that are underneath the decal. Then you can remove the top paper from the decal, and carefully go over the decal for any remaining solution that's underneath, or bubbles. If your decal has any remaining material like our hash marks did, go ahead and cut them, roll them underneath your fender, and where the hood and fender meet.
With a little time and a lot of patience, you can add that custom look to your Mustang with our decals, and SVE decal application kit. For more Mustang tech and info videos, subscribe to our YouTube channel, or check us out on the web at latemodelrestoration.com.
SVE, or Special Vehicle Equipment, is your trusted source for 1979-93 Mustang Foxbody, 1994-98 Mustang SN95, 1999-04 Mustang New Edge, or 2005-present Mustang S197 performance and styling products. Buy SVE products from Latemodel Restoration Supply and receive the best value and quality, with industry-leading customer service. Whether you need Mustang wheels, Mach1 chin spoilers, control arms, subframe connectors, clutches, lowering springs, cold air intake kits, or big brake kits, SVE is the brand you should demand.
SVE and 50resto Warranty
One Year Hassle Free Replacement
SVE and 50resto products are warranted to be free from defects in materials or workmanship for one year from date of purchase. What does this warranty cover? YOU! That’s right, whether you ordered a SVE brand Mach I grille delete or a 50resto brand light kit, if your product fails within a year of your purchase we got your back! Some conditions will apply.
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!
My '13 3.7 PP. Sitting on SVE Progressive Rate Springs, SVE 93 Tune, SVT front and rear sway bars, Shelby Razor 20x9 wheels. Have a JLT CAI and Roush Axlebacks. Also, can't miss that LMR banner! Been ...