Due to a warehouse move all wheels & wheel tire kit shipments will be delayed until Monday 12/22.
Popular Upgrade For GT & V6
Increased Stopping Power
Gives Your Mustang High End Brake Attitude At a Fraction Of The Cost
New Black 2 Piston Cobra Style Caliper
Matching Rear Black Calipers
High Performance Compound Brake Pads
Braided Stainless Steel Hoses
StopTech Premium Slotted Front Brake Rotors
What's in the Box
(1) LH Black SVE Brake Caliper
(1) RH Black SVE Brake Caliper
(2) Caliper Mounting Brackets
(4) Caliper mounting Pins
(1) LH Front StopTech Brake Rotor
(1) RH Front StopTech Brake Rotor
(1) Set High Performance Compound Brake Pads
(1) Set Of Front Braided Stainless Brake Lines
(1) RH Black Rear Caliper
(1) LH Black Rear Caliper
(1) Set Rear Caliper Pads
As many of you know by now, Ford has stopped producing their popular Mustang Cobra Brake calipers. Have no fear though!!!!! Not only has LRS stepped up to the plate and offered a solution for those looking for cobra brakes, we took the common upgrades that normally went with a standard set of brakes and made a complete High Performance Brake Kit!
This SVE Brake Kit include an set of New Black Cobra Style 2 piston brake calipers as well as a matching set of rear calipers. All these SVE Brake Calipers and mounting brackets feature a bright red finish that is sure to make them stand out and be seen on your Mustang. The SVE Cobra Style front & Rear Brake Calipers come loaded with a high performance friction compound pad that is aggressive enough for weekend track days and auto cross events, yet gentle enough to still use on a daily driver without excessive rotor wear.
We didn't stop there. LRS also included a set of Stoptech Braided Stainless steel brake hoses that will meet the demands of this Mustang brake kit as well as add some more eye appeal to your Mustang brake upgrade kit. New banjo bolts and crush washers are also included to round out the package and complete the installation.
What better way to finish out the SVE Cobra Style brake kit than with a set of StopTech High performance front brake rotors. LRS includes a set of LH & RH premium 13" Front slotted brake rotors to put the icing on the cake. These StopTech Brake Rotors feature a durable black e-coat on the hat, edges, and internal vanes to prevent corrosion which will keep your rotors looking as good as the rest of your Mustang.
This SVE Brake kit is the perfect addition to any 1994-2004 Mustang GT or V6 as well as a tremendous upgrade for 1979-1993 foxbody mustangs using the SN-95 Spindle 5 lug conversion.
* * * NOTE:These SVE Calipers are a Direct replacement for OEM Ford Cobra Calipers and use the factory replacement pads and hardware as the cobra calipers as well.* * *
Video: Mustang Brake Installation: SVE Cobra Style
Published on 2013-08-21
Installing the SVE 13" Cobra Style brake kits will take you just a couple hours depending on which kit you pick up. Watch this video and follow along as Jmac shows you how to install new brakes on your Mustang. Removal and installation will take you a couple hours and will greatly improve your braking performance
MUSTANG SVE 13" COBRA STYLE STOCK FRONT BRAKE KITS Brand: SVE Caliper Color Options: Black or Red Fit: Ford Mustang V6, GT, Mach 1, Bullitt & SVT Cobra Years: 1994 (94) - 1995 (95) - 1996 (96) - 1997 (97) - 1998 (98) - 1999 (99) - 2000 (00) - 2001 (01) - 2002 (02) - 2003 (03) - 2004 (04)
Upgrading your brakes should be on any Mustang enthusiast list of performance mods. A popular brake upgrade for SN95 and New Edge Mustangs is swapping out the factory V6/GT brakes in exchange for the 13" Cobra brakes. Thanks to SVE you can now have the 13" Cobra style brake kits. They are available in multiple different kit formats and color options. Whether you are looking for factory style rotors and hoses or you want to upgrade to slotted rotors and steel braided lines, SVE and LatemodelRestoration.com has you covered!! Check out the link at the top for more information on the SVE Brake Kits!
Braking performance isn't exactly the top of most people's list, but it sure should be. Having your Mustang stop when you want it to increases your safety and everybody else's around you.
The stock '94 to '04 Mustang GTs and V6s are equipped with either a single piston caliper with an 11 inch rotor or-- '99 to '04, they did get a dual piston aluminum caliper with 11 inch rotor-- still pretty small, though. A very common upgrade is a Cobra Style Front Brake Conversion Kit that gets you up to 13 inch front rotors and a massive two-piston Cobra style caliper. This is a direct bolt-on kit, and it'll take you just a few hours in your driveway.
You want to start by supporting the front of the car on jack stands, and remove both front wheels. You can remove your caliper bolts, slide the old caliper off, and pull the old rotor off the hub. Remove the brake hose retaining clip and using a line wrench, also known as a tubing wrench, loosen the connection at the hard line.
Now you can fully remove the hose and caliper assembly from the car. Slide your new braided hose into place, thread it on the hard line and tighten it down. Reinstall the retaining clip.
Side your new 13 inch front rotor onto the hub. Slide your new SVE caliper assembly over the new rotor. Tighten down your two caliper retaining bolts-- be sure to use some blue Loctite.
Attach your new brake hose to the caliber, using the supplied banjo bolt, and make sure that you put the two new copper washers that are also supplied with the caliper-- torque to spec. Repeat all these steps for the other side and then bleed your brakes.
You'll want to start with the passenger front and then move to the driver front. Make sure you've got plenty of quality DOT 3 brake fluid to top off your master cylinder while bleeding.
With the installation of our SVE Style Front Brake Kit, you will need to make sure that you're running a minimum of a 17 inch wheel. These kits are available with either a red powder coat or a black powder coat caliper. They come loaded with StopTech Performance Street brake pads. And either way you choose, they come with Power Slot rotors and top-of-the-line stainless, braided hoses. Check out the rest of our braking options at latemodelrestoration.com.
Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
SVE, or Special Vehicle Equipment, is your trusted source for 1979-93 Mustang Foxbody, 1994-98 Mustang SN95, 1999-04 Mustang New Edge, or 2005-present Mustang S197 performance and styling products. Buy SVE products from Latemodel Restoration Supply and receive the best value and quality, with industry-leading customer service. Whether you need Mustang wheels, Mach1 chin spoilers, control arms, subframe connectors, clutches, lowering springs, cold air intake kits, or big brake kits, SVE is the brand you should demand.
SVE and 50resto Warranty
One Year Hassle Free Replacement
SVE and 50resto products are warranted to be free from defects in materials or workmanship for one year from date of purchase. What does this warranty cover? YOU! That’s right, whether you ordered a SVE brand Mach I grille delete or a 50resto brand light kit, if your product fails within a year of your purchase we got your back! Some conditions will apply.
I would like to give a big thank you to Latemodel Resto Employee Tyler Rodriguez, he went above and beyond to provide outstanding Customer service, really made me a customer for life, i plan to make all my future purchases from latemodelresto when i get my hands on a 2015 Mustang. thanks again Tyler for the outstanding customer service you and latemodelresto provide.