Yes, this kit will clear the Saleen wheels on the front and rear of your Fox. The front set up is a Sn style swap and will be perfect for your application.
Answered by Jay W. from waco | Comment 0 0
Killian, This brake conversion does not include the dual piston Cobra calipers. For use with those calipers I would suggest the 93 Cobra master cylinder (LRS-2140D), the 3-2 port conversion (MM-MMBAK3) when using dual piston front calipers.
Answered by Tommy E. from Hewitt | 1 Comments 0 0
This fits 1987-1993 Mustangs w/ 5.0. This will also fit 1979-1986 Mustangs 5.0 w/ 87-93 5.0 front struts and 1979-1986 Mustangs 2.3 w/ 87-93 5.0 front struts regardless of the brand.
Answered by BRYAN M. from TROY | Comment 0 0
This kit comes with 28 spline axles, but we can swap them for 31 for you. Give one of our Customer Care Reps a call at 866-507-3786, and we can put the kit together for you with 31 splines.
Answered by Karson S. from Hewitt | Comment 0 0
Because the hub bearing is located inside the rotor on the 79-93 mustang you are limited to very few wheels that will fit due to the portion of the rotor that houses the hub bearing sticking out from the mounting face of the rotor. With the SN-95 spindles the hub bearing is part of the spindle assembly so you can fit any wheel that will fit a 94-04 Mustang as long as it is not to large for the smaller foxbody wheel openings.
Answered by Nathan A. from Waco | Comment 0 0
Ford Mustang - 1979 (79) - 1980 (80) - 1981 (81) - 1982 (82) - 1983 (83) - 1984 (84) - 1985 (85) - 1986 (86) - 1987 (87) - 1988 (88) - 1989 (89) - 1990 (90) - 1991 (91) - 1992 (92) - 1993 (93)