Mustang Smoked Fog Light Tint
This 2013-14 Mustang smoked fog light tint is an easy way to give your S197 aggressive and stealthy looks. The "smoked" or "blacked out" look is one of the most popular trends in the Mustang community. Don't ruin your fog lights with spray on tint, pick up this smoked fog light decal kit for an easy to install modification that can easily be removed at any time. These stickers apply over your stock fogs and give them a smoked look while still letting light through at night. Made from high quality vinyl, this tint has been test fitted to perfectly cover your lights to give your Mustang a clean, new look.
Don't fall for the knockoff film that is only 2-3mm thick. We are proud to offer Lamin-X film that is 12mm thick! This film applies easier, stands up to heat and rock protection better than any other film on the market. All of this is accomplished without affecting light output!
At first I thought these would be a pain to install since its hard to get your hand inside the bezel but then noticed they are oversized so the extra is actually hidden behind the bezel. There were no installation instructions and they came rolled up so I had to flatten them out for a day before installing. I did the soapy water spray thing like I did on my other light tint but who knows if that was the way to go or not.
The install was pretty quick and easy but then I noticed the next day I had some bubbles on one side. Then after trying to smooth them out it just got worse and eventually got to the point where I wanted to just remove it. I tried poking holes with a pin and using a hair dryer to see if I could smooth it out and its a little better. I read that putting it out in the sun for awhile will clear things up so maybe it will get better.
If you use these just be sure not to touch the side that goes on the light because it will show fingerprints everywhere you touched. You wont see them unless you shine a light on them like I did while trying to take the bubbles out.
Overall they look good but I would have liked the color to be more grey instead of the slight yellow tint they have to them
SVE, or Special Vehicle Equipment, is your trusted source for 1979-93 Mustang Foxbody, 1994-98 Mustang SN95, 1999-04 Mustang New Edge, or 2005-present Mustang S197 performance and styling products. Buy SVE products from Latemodel Restoration Supply and receive the best value and quality, with industry-leading customer service. Whether you need Mustang wheels, Mach1 chin spoilers, control arms, subframe connectors, clutches, lowering springs, cold air intake kits, or big brake kits, SVE is the brand you should demand.
SVE and 50resto Warranty
One Year Hassle Free Replacement
SVE and 50resto products are warranted to be free from defects in materials or workmanship for one year from date of purchase. What does this warranty cover? YOU! That’s right, whether you ordered a SVE brand Mach I grille delete or a 50resto brand light kit, if your product fails within a year of your purchase we got your back! Some conditions will apply.
This is by far the best experience I have ever had buying parts for my mustang. There is no other place for me, then LatemodelResto. I have bought multiple parts over multiple orders and have had nothing but a smile from ear to ear. Aaron Westerman was my contact person from LatemodelResto. I could not ask for a better customer service representative than him! He went above and beyond multiple times for me and made my experience with Latemodel the reason I keep coming back. LatemodelResto will continue being my #1 stop for my Mustang parts.