Smoked Tail Light Tint
This 2010-2012 Mustang SVE smoked tail light tint adds aggressive looks while also protecting your taillights. These covers are made of high quality vinyl with an adhesive backing for an easy installation. Simply peel and stick these decals straight onto your tail lights to save the time and money of painting them. These decals do not cover the reverse light for a custom look. Pick up this kit along with a trunklid blackout for the perfect look on your S197 Mustang!
Don't fall for the knockoff film that is only 2-3mm thick. We are proud to offer Lamin-X film that is 12mm thick! This film applies easier, stands up to heat and rock protection better than any other film on the market. All of this is accomplished without affecting light output!
Never installed a set of vinyl decals on a car before? Watch this installation video as Jmac walks you through the simple steps needed to install a decal on your Stang. We offer a full selection of SVE decals for your Mustang and SVT Lightning. Be sure to check out the link above to see a full selection of decals, stripes and graphics available for your ride!
Fender Hash Marks Bumper inserts tail light decals & tint hood stripes body stripe kits C Stripes - Boss 302 style Body molding stripes fender decklid windshield hood scoop side stripes and plenty more!!!
Jmac: If you've ever wondered how difficult it is to install a set of vinyl decals on your Mustang, we're going to show you just how easy it is by installing set of our tail light decals on this 2012 Mustang. Couple of things you're going to want to have plenty of is time, patience, and also one of our SVE decal installation kits.
You'll want to start out with this area clean, so if you need to wash your car before hand, go and do that. Start by eyeballing your decal and trimming it before installation. For this particular decal, I trimmed closely along the bottom edge for a baseline and then trimmed out inside the reverse light openings for proper positioning.
Peel the protective backing off. Spray the decal with the SVE decal solution. Lightly apply the decal in place, properly align it, and start using the squeegee in the SVE decal installation kit to smooth all the water out from behind the decal.
Let it dry for 15 to 20 minutes, squeegee begin, and carefully start peeling back the adhesive paper. Keep your squeegee at hand, and wipe over the decal slightly if needed.
Fully remove the adhesive paper, wipe down over the entire decal, and work out any air bubbles. Any small air bubbles that remain, don't worry. They'll come out after a few days in the sun.
And there you go. Time, patience, and the right tools, you can have any decal kit installed on your Mustang in no time at all. Check out latemodelrestoration.com's full line of decals for 1979 to present Mustangs today.
Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
Simple install! I love the way the rear end looks now!
Jaron C. on
Simple and easy install. If you take your time the results are great! Be sure to get the SVE Decal Application Kit. It makes the process even easier!
Was this review helpful to you?
Daniel J. on
Love the tint. Only gripe is I wish the reverse lights could be tinted easily as well but even still it looks darn good and was easy to do at home myself. Clearly you have the light visibility when breaking too so safety isn't an issue.
SVE, or Special Vehicle Equipment, is your trusted source for 1979-93 Mustang Foxbody, 1994-98 Mustang SN95, 1999-04 Mustang New Edge, or 2005-present Mustang S197 performance and styling products. Buy SVE products from Latemodel Restoration Supply and receive the best value and quality, with industry-leading customer service. Whether you need Mustang wheels, Mach1 chin spoilers, control arms, subframe connectors, clutches, lowering springs, cold air intake kits, or big brake kits, SVE is the brand you should demand.
SVE and 50resto Warranty
One Year Hassle Free Replacement
SVE and 50resto products are warranted to be free from defects in materials or workmanship for one year from date of purchase. What does this warranty cover? YOU! That’s right, whether you ordered a SVE brand Mach I grille delete or a 50resto brand light kit, if your product fails within a year of your purchase we got your back! Some conditions will apply.
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!