If you are looking to transform the look of your 2005-09 Ford Mustang GT, you need this SVE Exterior Appearance Pack! This kit offers all of the popular exterior styling parts to transform the look of your Mustang. The kit includes a set of FSVE Lowering Springs, an SVE CV2 Style Front Chin Spoiler and a set of Sequential Taillight Harnesses! All of these components will give your 05-09 Mustang GT an aggressive and clean look to keep you standing out from the crowd!
***Chin spoiler comes with a matte black finish but it's recommended that it be prepped and painted prior to installation.***
Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
Published on 2013-02-07 Want to add some retro 67-70 model Shelby Mustang look to your 05-09 S197 Mustang? Look no further than the LatemodelRestoration.com Mustang Sequential Tail Light Kits (Part # WEB-STS1M5HR). They are plug-n-play designed for super simple installation. They feature pre-wired harnesses that replace your factory taillight bulb harness. That means there are no cutting, splicing or socket modifications needed for this install. The installation consists of simply removing the tail light assemblies, transferring your bulbs to the new harnesses, connect the data cable and reinstall.
Watch the video as Jeff walks you through the installation process for our 05-09 Mustang Sequential Tail Light Kit. Don't forget to finish off the exterior of your S197 Mustang with a SVE Decklid Panel; better yet, save some money and time by buying the Latemodel Restoration 05-09 Mustang SVE Decklid Blackout Panel and Sequential Tail Light Kit:
Sequential Tail Light Kits Features: * Correct rubber grommet to keep moisture out of the trunk * OEM style cable retainer * OEM wiring connector for true plug-n-play installation * Classic Retro Styling - Add some American muscle Mustang look to your S197 Mustang
Need help installing lowering springs on your 05-14 Mustang? Follow along in this video as Jmac shows you how to lower your Mustang with a set of our SVE Lowering Springs. These high quality performance springs will improve your handling. They are progressive rate springs designed for aggressive styling without sacrificing ride quality. They will lower your Stang roughly 1"-1.5". They are made in America and feature a 1 million mile warranty!!!
The installation process is the same for all other lowering springs such as Eibach Pro-kit, Sportlines, Ford Racing, H&R, Steeda and more. This same process can be used to help you install coil over kits as well.
0:00:00 - 00:21 Mustang sequential tail lights were made popular by the 67-70 models Shelby mustangs back in the American muscle car days. Now the 05-09 mustangs didn't feature sequential tail lights from the factory. Here at LatemodelRestoration.com we have a plug-and-play a href=http://www.latemodelrestoration.com/item/WEB-STS1M5HR/05-09-Mustang-Sequential-Tail-Light-HarnessMustang sequential tail light harness to give your Mustang that sequential tail light look.
0:00:21 - 0:00:36 This kit features pre-wired harnesses, detailed instructions and a phone data cable. To make this installation even easier, the harness is pre-labeled to make sure that you don't get tail light bulbs out of order.
0:00:36 - 0:00:53 I can't wait to see these in action so let's go ahead and get this install started. To start the install remove the top two retainers with a flat head screw driver. Then remove the lower two. Then you can go ahead and remove the two screw type retainers with a t-27 torx bit.
0:00:53 - 0:01:12 Now you can remove the rear trunk liner with that out of the way you can now disconnect the wiring harness move on to removing the three nuts that hold the tail lights in place remember to push the grommet and the wiring harness through the body, then you can remove the tail light.
0:01:12 - 0:01:26 Take your tail light assembly and place it on micro fiber towel to protect the lens. Remove the wiring harness retainer followed by your reverse light socket now you can remove the remaining three sockets from the tail light.
0:01:26 - 0:02:00 With the wiring harness removed you can now transfer the bulbs over to the new harness if you have a high mileage mustang now is a great time to replace the bulbs to install the new harness take that socket number one and re-install it in the inner most tail light take socket number two then install it in the middle and finally socket three on the outermost tail light. Re-install the reverse light and the wiring harness retainer. Repeat this process on the other side.
0:02:00 - 0:02:18 Then you can re-install your tail lights. After re-installing your tail lights you can now take the phone data cable and plug it into the left ports on the wiring harness plugged the tail light harness into the body wiring harness and the repeat on the right side.
0:02:18 - 0:02:32 Now it's time for some testing to make sure the car turn signals and hazards have been off for at least five minutes with the car running turn on the left signal and let it run for one minute turn on the right signal and let it run for one minute.
0:02:32 - 0:02:46 Now if you have any questions while installing this tail lights, they come with a detailed set of instructions as well as a problem shooting guide now once you finish up that test procedure you can slap that that plastic trunk liner back into place and you're finished!
0:02:46 - 0:03:11 Now when you go to use your turn signals they're going to scroll from the inner to the outer most tail light in a controlled smooth fashion. it's an definitely going to get the attention of those driving behind you so go to LatemodelRestoration.com today to order your 05-09 sequential tail light kit and don't forget follow us on twitter Facebook and YouTube to share your mustang experience with other mustang enthusiast
SVE, or Special Vehicle Equipment, is your trusted source for 1979-93 Mustang Foxbody, 1994-98 Mustang SN95, 1999-04 Mustang New Edge, or 2005-present Mustang S197 performance and styling products. Buy SVE products from Latemodel Restoration Supply and receive the best value and quality, with industry-leading customer service. Whether you need Mustang wheels, Mach1 chin spoilers, control arms, subframe connectors, clutches, lowering springs, cold air intake kits, or big brake kits, SVE is the brand you should demand.
SVE and 50resto Warranty
One Year Hassle Free Replacement
SVE and 50resto products are warranted to be free from defects in materials or workmanship for one year from date of purchase. What does this warranty cover? YOU! That’s right, whether you ordered a SVE brand Mach I grille delete or a 50resto brand light kit, if your product fails within a year of your purchase we got your back! Some conditions will apply.