(2) ADAPTER STUBS TO FIT FACTORY MANIFOLDS (3" OD AND 2-1/2" OD X 6" LONG - NO NOTCHES)
(1) 3" X-PIPE
(2) 3" FRONT TAILPIPES WITH 3" ID INLETS
(2) 3" MIDDLE TAILPIPES WITH 3" ID INLETS
(2) 3" REAR TAILPIPES WITH 3" ID INLETS
(2) 5 X 9 X 14" CHAMBERED TURBO MUFFLERS WITH 2.5" DIA CORE, 3" ID INLET AND 3" OD OUTLET WITH WELDED HANGERS
(2) 4" DIA ROLLED EDGE TIPS WITH 3" ID INLET - POLISHED (1.0" STUB)
(10) 3" SS ACCUSEAL CLAMPS
(2) 3" SS SINGLE BAND CLAMPS FOR TIPS
(2) KOOLMAT HEAT WRAP: (1) 5" X 10" AND (1) 6" X 6" LONG
(6) ZIP TIES - 6" LONG MIN.
This Stainless Works catback system for your 2005-2009 4.6 GT is designed to maximize performance, improve style and enhance sound characteristics. Featuring 100% stainless steel construction, this system increases airflow which creates a noticeable improvement over the stock power level! 3" mandrel bends and massive polished rolled edge tips make this kit look as good as it performs! This Stainless Works 2005-2009 Mustang GT cat-back exhaust Includes hangers and clamps and offers a Great musclecar sound that is sure to make you smile!!!
Stainless Works - Performance Exhaust Products
Stainless Works is a manufacturer of High Quality 304 Stainless Steel headers, exhaust systems, and exhaust components for Latemodel Mustangs. Stainlessworks Headers are designed to provide their customers with exact fit components to their specific applications. They are constantly adding new products and verifying fitment for new vehicles, model years and special motor applications. Many of their newer products have proven performance increases through pre and post dyno testing of vehicles. Their Stainless Steel products are made by craftsman from the finest materials to their precise specifications and their very high standards. These materials will never red rust like the cheaper 400 series Stainless materials used by their competitors. Stainless Works stands by the quality and workmanship of their products and strives to improve the experience of the products for their valued customers.
Products by Vehicle
Upload a Picture
Upload your own picture of the Mustang 3" Catback Exhaust System (05-09)
Please make sure to hold your device horzonally (like a camera) rather than vertical (like a phone).
By uploading an image, you agree to give LatemodelRestoration.com permission to use it in future advertisements and promotions.
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!