Powder Coated Black with Pre-Masked Weld Attach Points
What's in the Box
(1)Pair Subframe Connectors
(1)Pair Rocker Stiffening Rails
(1)Set of Web Bracing
All Necessary Hardware
Get More from your 79-93 Fox Body Mustang with a Stifflers Chassis Stiffening Fit Kit. Take the unwanted chassis flex out and put the performance in! This set included full length subframe connectors, rocker stiffening rails and web bracing to tie everything together. Powder coated and pre-masked to keep you from having to grind off the powder coat, this kit is better manufactured & engineered than any other on the market. Great for Dragstrip cars, road racers, auto crossers & serious street cars, if you want the most from your Mustang, you want Stifflers!
just take it out from the box then you will notice the perfect design of the product.
Yes, I would recommend this item to a friend!
Was this review helpful to you?
Matt H. on
These were a pain to install on my car, but well worth it. Over the years, people have decided that jacking the car all along the pinch weld was a good idea. These bolt up to the seat bolts, get welded on to the "frame", have bracing to the solid pieces that get welded to the pinch weld. Took two hours or so to straighten out the pinch welds, then they went in great.
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!
My name is Bryan Bayer and this is my 1988 Mustang GT. Currently going through the process of smoothing the engine bay and building a new motor. Motor is a stock short block 302 with GT40P heads and t...