Get the right stance on your 05-14 Mustang with a set of Ultralite Lowering Springs by Steeda.
Springs are the foundation of good handling. So start with the best. Our experience and expertise in high performance street and racing suspension systems is second to none. Put that experience to work for you. Steeda springs are all custom made to our specifications and were developed in conjuction with Ford Motor Company engineers through our technology transfer program. Steeda spring provide the best combinations of handling and ride quality available!
Lowers the vehicle approx 1 inch front, 1 1/4 inch rear. The 05-13 Mustang sits high in the rear. These springs will give it a more aggressive look. High quality lower weight wire for less unsprung weight and less inertia for the best ride quality available. Good improvement in handling and noticeable reduction in nosedive.
Don't forget yourPanhard Bar!
Unfortunately when lowering a 2005-14 Mustang, you will experiences a shift in the rear axle due to the 3-link suspension setup. Once the Mustang has been lowered, the geometry of the suspension pushes your Mustang's axle out to one side. Adding a Mustang Panhard Bar as a lateral suspension link between the rear axle and the Mustang chassis can correct this issue. The simple design precisely controls the side-to-side location of the axle to eliminate rear steer. The unstable and unpredictable feeling typically associated with the Mustang 3-link suspension is gone, making your car safer and easier to drive!
Steeda - Everything Mustang
Latemodel Restoration Supply is proud to offer Steeda products for your Mustang. Steeda Autosports is the #1 aftermarket company in Ford performance with performance Mustang, Focus & Fusion parts. With over 25 years under their belt, they are still one of the #1 aftermarket Mustang parts manufacturer in the industry. Their extensive research and development has produced top notch, high quality parts that get your Mustang performing, handling, and looking better. Shop LatemodelRestoration.com to get Steeda clutch cables, sport lowering springs, Tri-ax shifters, x2 ball joints, control arms, cold air intakes, sway bars, bumpsteer kits, coilovers, and a variety of other performance parts.
My 1988 fox body lx 5.0 has 70,000 miles on it . I redid the seats with the TMI seat covers.I Put on after market wheels, with a decal on the center caps . The rims are a Voxx rim. With a red running ...