Milled from aerospace grade aluminum for lightweight and high-strength this Steeda Billet Shifter Base and Bushing for your 2011-14 Mustang GT or V6 is a must have!. It completely replaces the flimsy, low durometer OE shifter base bushing assembly. Comes with two different durometer custom made polyurethane bushings to chose from; one low durometer for no increase in shifter NVH, and a high durometer for minimum compliance. Easy to install and does not require any permanent modifications to your Mustang. Cut down on sloppy shifts and get down the track faster!
Installation was very easy, the instructions were spot on. The only tough part was trying to angle in the bracket over the bushing. I recommend using plenty of lubricant. Of course, you could just drop the driveshaft for an easier install. I used the black bushing considering I am still using the oem shifter. There is an increase in nvh but it is minimal. I bought a little bit of dynamat to put around the shifter area, which helped significantly. The good news is that I no longer miss 3rd gear or any gear. Each shift is more precise and spot on. Highly recommended
Yes, I would recommend this item to a friend!
Was this review helpful to you?
morgan d. on
I had a barton 2-post, which functioned quit well. However it was way too noisy. It induced excessive NVH in the cabin. so much so it really irritated me, an incredible amount of buzzing. I even added dynomat to to the center console area to help but it was still too much. So i got the steeda and put that in instead. this is also very well made and it did exactly as I hoped. It keeps everything nice and tight but yet with no increased noise. I am using the softer red bushing but may very well try the harder, black bushing the next time i'm under the car.
Was this review helpful to you?
No more missed shifts
Doug W. on
After missing several shifts at the track (road course) I thought I needed to change the shifter. Then I saw this bracket and thought I'd give it a try. What a huge improvement in the tightness and accuracy of the shifts! Love the feel and feedback I get with it. I used the black bushing and only had a minimal increase in NVH - enough to make it feel just right :). Can't wait to try it out at the track. I wish I had installed this a long time ago!
Steeda - Everything Mustang
Latemodel Restoration Supply is proud to offer Steeda products for your Mustang. Steeda Autosports is the #1 aftermarket company in Ford performance with performance Mustang, Focus & Fusion parts. With over 25 years under their belt, they are still one of the #1 aftermarket Mustang parts manufacturer in the industry. Their extensive research and development has produced top notch, high quality parts that get your Mustang performing, handling, and looking better. Shop LatemodelRestoration.com to get Steeda clutch cables, sport lowering springs, Tri-ax shifters, x2 ball joints, control arms, cold air intakes, sway bars, bumpsteer kits, coilovers, and a variety of other performance parts.
K&N CAI,Ford Racing Tune,SVT Muffs Michelin 285-40-18 on Rear, 255-18 on front, Lowered.....Was looking at a Focus for mileage.....wife did not like,told me to get the Mustang...Oh it's RACE RED...Not...