Requires Aftermarket Quadrant & Adjustable Clutch Cable Or Firewall Adjuster
Made In The USA
What's in the Box
(1) Clutch Pedal Stop Assembly
All Needed Hardware
Steeda's new pedal stop adjusts the height of the clutch pedal for better driving comfort and optimum pedal travel. The factory pedal placement puts the clutch about two inches above the brake pedal. Aftermarket quadrants lower the pedal down a little, but exactly how much varies based on the design of the quadrant, and can't be adjusted. Either way, the result is a compromise as some people prefer the pedal higher or lower. In addition, some racing clutches release very quickly and require the pedal travel to be shortened to prevent damage to the diaphragm.
Adjustable cable and quadrant kits have been used for years to adjust the tension of the clutch cable, but they don't adjust the height of the pedal when your foot is off the clutch. That height is fixed in place by the design of the quadrant. Steeda's new pedal stop adjusts the height of the pedal with the simple turn of bolt. Installation is simple and requires no drilling.
Note: This part requires the use of an aftermarket non-adjustable clutch quadrant and an adjustable cable or firewall cable adjuster.
Steeda - Everything Mustang
Latemodel Restoration Supply is proud to offer Steeda products for your Mustang. Steeda Autosports is the #1 aftermarket company in Ford performance with performance Mustang, Focus & Fusion parts. With over 25 years under their belt, they are still one of the #1 aftermarket Mustang parts manufacturer in the industry. Their extensive research and development has produced top notch, high quality parts that get your Mustang performing, handling, and looking better. Shop LatemodelRestoration.com to get Steeda clutch cables, sport lowering springs, Tri-ax shifters, x2 ball joints, control arms, cold air intakes, sway bars, bumpsteer kits, coilovers, and a variety of other performance parts.
Products by Vehicle
Upload a Picture
Upload your own picture of the Mustang Steeda Adjustable Clutch Pedal Stop (94-04)
Please make sure to hold your device horzonally (like a camera) rather than vertical (like a phone).
By uploading an image, you agree to give LatemodelRestoration.com permission to use it in future advertisements and promotions.
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!