Blue Powdercoated Finish Bump Stop and Hardware Included
For Lowered Cars ONLY
What's in the Box
(1) Tubular Control Arm
(2) Aluminum Reinforcement Plates
(1) Bump Stop and hardware
Steeda 3rd Link Tubular Rear Upper Control Arm
Need more axle control with those sticky tires on your S197 2005-10 Mustang? The new Steeda Tubular Upper 3rd-Link gives you the ability to eliminate the torque deflection associated with the factory piece. Steeda's upper link uses their track proven three-piece urethane bushing design on the chassis end to eliminate the annoying windup and wheel-hop you get with the soft factory bushing. Steeda's upper 3rd link is a direct replacement for the factory original bolting into the factory location. This is for lowered cars only. It is shorter than the stock control arm to help correct the pinion angle. Aluminum reinforced plates are a very high, aircraft quality. Comes Blue powdercoated with bump stop and hardware.
Stepped Spacer Info
This spacer is designed to fix the problem with the OEM upper link. At the attachment point for the upper link to the chassis mount Ford uses a 14mm bolt, but the opening in the mount is 16mm. This is not typically a problem with the OEM mount as it uses a soft hydra mount bushing to soften this. But once an aftermarket upper is installed with a urethane bushing can transmit this noise or clunk. This space can be installed with all aftermarket upper that still use a 14mm bolt. The stepped spacer takes up the slop and eliminates all noise from the upper. Note, it does work with aftermarket chassis mounts with smaller then 16mm bolt holes.
- This Steeda's non-adjustable upper third link is for use on LOWERED Mustang's ONLY.
- It is shorter than the stock control arm to help correct pinion angle on said lowered cars.
- All Steeda Upper Third Links produced on or after February 2007 include the Stepped Spacers.
Steeda - Everything Mustang
Latemodel Restoration Supply is proud to offer Steeda products for your Mustang. Steeda Autosports is the #1 aftermarket company in Ford performance with performance Mustang, Focus & Fusion parts. With over 25 years under their belt, they are still one of the #1 aftermarket Mustang parts manufacturer in the industry. Their extensive research and development has produced top notch, high quality parts that get your Mustang performing, handling, and looking better. Shop LatemodelRestoration.com to get Steeda clutch cables, sport lowering springs, Tri-ax shifters, x2 ball joints, control arms, cold air intakes, sway bars, bumpsteer kits, coilovers, and a variety of other performance parts.
As a deployed service member, there are not many avenues of contacting companies back home conveniently. Between the time difference and use of wifi or morale phones, it can be challenging. Luckily the team at LateModel Restoration emailed me back quickly and gave me everything that I needed for a smoothe purchase, and a few more that followed. They were quick in reply and quick to help me out and I have my parts on the way to my home now because of it. I will be shopping here primarily and I recommend it highly to fellow Mustang folks.
I've done a complete engine swap from a 5.0 to a 5.8 Windsor motor that performs nicely. I've also upgraded the entire electrical system with MSD components as well . Future projects will include twi...