(1) 101mm Steeda 5.0L Mustang GT Cold Air Intake Kit
All Needed Hardware
Steeda's new high performance 101mm CAI effectively opens up the intake system of Ford's new five-liter power plant and allows it to breath much more freely than the stock intake system allows - taking your automatic transmission 2011-14 5.0L Mustang GT Automatic to the next level of performance.
To ensure the densest air charge possible we retained the factory cold air feed ducting from the front bumper and sealed the stainless steel shield to the hood to prevent any hot air from being sucked in from around the engine compartment. Other manufacturers have chosen to ignore the factory Mustang cold air ducting which is key to keeping the lowest air charge temperatures possible. Also, a billet aluminum velocity stack and high flow air filter ensure a clean, cool, streamlined air charge straight to the 2011-14 Mustang 5.0L engine. The new high flow "ProFlow" intake tube provides the necessary ports to retain the factory noise tube and PCV tubes.
This Steeda 101mm Cold Air Intake is so effective at improving airflow into the 2011-14 five-liter Mustang engine that a performance tune is not just recommended, it is required for maximum performance! In an effort to maximize performance and provide our customers with only the very best products Steeda partnered with the leader in automotive tuning - SCT Performance.
Combined with the required custom tune using an SCT X4 tuning device, Steeda achieved dramatic power increases of up to 44hp and 52ft/lbs of torque (comparing 87 octane stock to 93 octane tune/CAI)! While these are peak numbers, the actual power increase is spread throughout the entire rpm range so your increased performance is available on demand in any gear at virtually any rpm!
Steeda - Everything Mustang
Latemodel Restoration Supply is proud to offer Steeda products for your Mustang. Steeda Autosports is the #1 aftermarket company in Ford performance with performance Mustang, Focus & Fusion parts. With over 25 years under their belt, they are still one of the #1 aftermarket Mustang parts manufacturer in the industry. Their extensive research and development has produced top notch, high quality parts that get your Mustang performing, handling, and looking better. Shop LatemodelRestoration.com to get Steeda clutch cables, sport lowering springs, Tri-ax shifters, x2 ball joints, control arms, cold air intakes, sway bars, bumpsteer kits, coilovers, and a variety of other performance parts.
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!
2006 Mustang GT. I bought the car new in 06 with 1 mile. It has a steeda suspension, JBA exhaust, C&L CAI, U/D pullys, Ford Racing: Heads, cams, 3vlv intake. Braided hoses, and moroso tanks. It rides ...