(1) 101mm Steeda 5.0L Mustang GT Cold Air Intake Kit
All Needed Hardware
Steeda's new high performance 101mm CAI effectively opens up the intake system of Ford's new five-liter power plant and allows it to breath much more freely than the stock intake system allows - taking your manual transmission 2011-14 5.0L Mustang GT to the next level of performance.
To ensure the densest air charge possible we retained the factory cold air feed ducting from the front bumper and sealed the stainless steel shield to the hood to prevent any hot air from being sucked in from around the engine compartment. Other manufacturers have chosen to ignore the factory Mustang cold air ducting which is key to keeping the lowest air charge temperatures possible. Also, a billet aluminum velocity stack and high flow air filter ensure a clean, cool, streamlined air charge straight to the 2011-14 Mustang 5.0L engine. The new high flow "ProFlow" intake tube provides the necessary ports to retain the factory noise tube and PCV tubes. Features a 101mm mass air housing.
This Steeda 101mm Cold Air Intake is so effective at improving airflow into the 2011-14 five-liter Mustang engine that a performance tune is not just recommended, it is required for maximum performance! In an effort to maximize performance and provide our customers with only the very best products Steeda partnered with the leader in automotive tuning - SCT Performance.
Combined with the required custom tune using an SCT X4 tuner device, Steeda achieved dramatic power increases of up to 44hp and 52ft/lbs of torque (comparing 87 octane stock to 93 octane tune/CAI)! While these are peak numbers, the actual power increase is spread throughout the entire rpm range so your increased performance is available on demand in any gear at virtually any rpm!
I bought a BBK 85 mm throttle body along with this Steeda COI.I had the Airaid race but this one was bigger and got better reviews.I was going to get a different throttle body so I made the switch.It was a hassle to install but well worth it.I had to get my car inspected so I took my race tune out for stock.Then today I finished it.Not sure if it was the TB at mid revs and then the filter pulls at high RPMS.
I have 3.73 gears and a Barton shifter so at 6500 RRS it pulls hard.I am pleased and the dragstrip sounds good.
Yes, I would recommend this item to a friend!
Was this review helpful to you?
Matt H. on
I installed this with a BBK 85mm, Boss Intake and SVE tune.... Talk about waking up a beast... I am very pleased.... I had to eliminate the cabin engine tube this thing is crazy load.... Sounds like a muscle car
Steeda - Everything Mustang
Latemodel Restoration Supply is proud to offer Steeda products for your Mustang. Steeda Autosports is the #1 aftermarket company in Ford performance with performance Mustang, Focus & Fusion parts. With over 25 years under their belt, they are still one of the #1 aftermarket Mustang parts manufacturer in the industry. Their extensive research and development has produced top notch, high quality parts that get your Mustang performing, handling, and looking better. Shop LatemodelRestoration.com to get Steeda clutch cables, sport lowering springs, Tri-ax shifters, x2 ball joints, control arms, cold air intakes, sway bars, bumpsteer kits, coilovers, and a variety of other performance parts.
2006 Mustang GT. I bought the car new in 06 with 1 mile. It has a steeda suspension, JBA exhaust, C&L CAI, U/D pullys, Ford Racing: Heads, cams, 3vlv intake. Braided hoses, and moroso tanks. It rides ...