Improve handling on your 05-14 Mustang and eliminate the unwanted flex and twist commonly found with the poorly designed factory pan hard bar. The Steeda 2005-2014 Mustang Adjustable Pan hard Rod keeps the rear axle located in the optimum position under the rear of the car, dramatically improving cornering and overall handling. You can easily fine tune your suspension with the Panhard bar installed on your mustang just by turning a wrench, no need to remove it to make adjustments.
High Quality Construction
This bar is made of 4130 chrome moly steel which is stronger the the stock mild steel bar and is 40% lighter!This new design over the old bars allows for center adjustability using a CNC machined chrome moly steel adjuster and chrome moly threaded inserts.
If you lower your car, you need this bar!
By nature, a Mustang Panhard Bar will alter rear end position as ride height changes. This makes it necessary to use an Adjustable Panhard Bar when lowering your vehicle as it allows you to re-center the rear end. Adjustable Pan hard Bars also become a "must-have" part if you are trying to fit the widest tires possible in the wheel well.
I bought this Steeda product to compliment previously installed upper and lower control arms, also Steeda products. I needed to install the adjustable panhard bar mainly to center the rear of the car. The fact that it is so much stronger than the factory bar is a huge bonus. This product is top notch quality. Installation was done on my garage floor with the car on jack stands, placed under the axel tubes. I took off the rear wheels which made removing the retaining bolts much easier. It is also a great time to clean and paint your calipers. Total install time including final adjustments was about 90 minutes. Torque for the retaining bolts is 129 Ft Lb. They do not tell you that in the instructions, they say to consult a service manual for the spec. I highly recommend this product for any 05 to 14 Mustang.
Yes, I would recommend this item to a friend!
Was this review helpful to you?
Another great Steeda product
Robert W. on
I installed this adjustable Panhard bar so that I could center the body over the rear axle. I have installed wider tires and I wanted to even the reveal for both sides. In addition, this bar is much stronger that the factory one and actually shaves a few pounds off too. Installation was performed in my garage with the car lifted and resting on jack stands placed under the axle tubes. With both rear wheels removed access, removal and installation is a snap. Including final adjustments I had it installed in 60 minutes with common shop tools. Great product and Latemodel Restoration is a great company to work with.
Steeda - Everything Mustang
Latemodel Restoration Supply is proud to offer Steeda products for your Mustang. Steeda Autosports is the #1 aftermarket company in Ford performance with performance Mustang, Focus & Fusion parts. With over 25 years under their belt, they are still one of the #1 aftermarket Mustang parts manufacturer in the industry. Their extensive research and development has produced top notch, high quality parts that get your Mustang performing, handling, and looking better. Shop LatemodelRestoration.com to get Steeda clutch cables, sport lowering springs, Tri-ax shifters, x2 ball joints, control arms, cold air intakes, sway bars, bumpsteer kits, coilovers, and a variety of other performance parts.
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!
This is a 2.3L 4banger! There has been many exterior upgrades, new paint, cobra R rims, custom cut (length and width) hash marks and mustang rocker stripe. Engine upgrades are in the future for this ...