Steeda's IMSA race program proven offset A-Arm bushings are available for your street or weekend track warrior Mustang. Steeda's offset A-Arm bushings make great service replacements for the stock A-Arm bushings.
(1) Set 94-04 Mustang Polyurethane Offset Control arm Bushings
Steeda took a great idea from their winning IMSA race program and redesigned it to be great for the street and the track. Just look at all the benefits: Moves the front control arms forward for better weight distribution and increased caster, Quicker steering response Improved overall handling, Straighter tracking and better high speed stability, Improved stability during hard braking, Holds alignment better during hard cornering, Outlasts rubber bushings, and better ride quality than standard "Delrin" bushings
I bought this kit over two months ago and finally was able to set aside the time to install them. There are a couple of issues that you would need to know prior to installing. One, the kit only comes with the rear bushing shells, not the front. You will have to reuse your factory front bushing shells. Two, you will have to take off three millimeters from the edge opposite from the flange on the rear bushing shells due to the fact that the shell is longer than what will fit in the stock K member. Three, use a good quality automotive grease on the front and rear of the bushings where they will rub on the mounting ears of the K member so they wont squeak.
Now... on to the good stuff. It is absolutely amazing what these bushings did for the handling and straight line tracking of the car. I never fully knew how soft the stock bushings were or how much they were deflecting under a load. The turn in is almost instant now and the car tracks exactly where I want it to know, not where it decides it wants to while taking suggestions from me. And finally, although they did increase the road and tire noise I hear now it's perfectly acceptable and easy to live with.
Now I know Steeda states that because these bushings increase caster and because of that they will increase bumpsteer, well if they have....I can't tell. If I measured the bumpsteer I would probably have some but I can't feel any while driving the car. These bushings were absolutely worth the money and time spent.
Steeda - Everything Mustang
Latemodel Restoration Supply is proud to offer Steeda products for your Mustang. Steeda Autosports is the #1 aftermarket company in Ford performance with performance Mustang, Focus & Fusion parts. With over 25 years under their belt, they are still one of the #1 aftermarket Mustang parts manufacturer in the industry. Their extensive research and development has produced top notch, high quality parts that get your Mustang performing, handling, and looking better. Shop LatemodelRestoration.com to get Steeda clutch cables, sport lowering springs, Tri-ax shifters, x2 ball joints, control arms, cold air intakes, sway bars, bumpsteer kits, coilovers, and a variety of other performance parts.
Testimonial: The best company I have ever dealt with
LRS hands down is doing everything right. Every experience I have ever had with them shows just what an amazing company they are. There is a reason I come back time after time, instead of going to those "other" mustang aftermarket websites. Customer service is the name of their game, and they are winning. It does not matter whether you call, email, forum PM, or go to the actual store, they are always incredibly helpful and enthusiastic. (Getting to see the Cobra R in their showroom was awesome). I'm proud to have the LRS windshield banner on my car, because I know they will always have my back.