No Kelvin, this conversion kit includes stock sized front rotors that are 5 lug and converts the back drums to disc brakes. The SN brake rotors are bigger, and have a hub assembly that have sealed bearings.
Answered by BRYAN M. from TROY | Comment 0 0
Are the axles from this kit available apart from the kit. I purchased a ssbc rear disc brake conversion kit for four lug with a 10 inch rotor and was wondering if late model restoration offers that exact axle shaft but in 5 lug thank you. 93 fox
Asked by Omar A. from San Leandro | Comment 0 0
It would be better to start over rather than trying to source individual items. These axles are specific to this kit, and are only available in the kit. You may check E-bay, craigslist, or a salvage yard , but in doing that you will run the risk of getting the wrong axle for the application.
Answered by Jay W. from waco | Comment 0 0
If you are putting this kit on a factory 87-93 V8 Mustang the offset and backspace will not change. It re-uses the factory spindle and a fox length axle. You will use a wheel with a 94-04 offset and backspace. Here's a list of wheels that will work.
99-04 SVE 10th Anniversary
95 Cobra R Wheel
94-95 17" "Tri-Bar" GT Wheel
94-98 16" Waffle Star Pony Wheel
94-97 Cobra Wheel
94-04 15" V6 Wheel
94-04 16" V6 Wheel
SVE Drag Wheels
Billet Specialties Street Lites
Answered by Lee C. from Hewitt | Comment 0 0
This kit comes with 28 spline axles and cannot be switched out with 31 spline axles. Check out this link for our many other 5 lug conversion kits - http://www.latemodelrestoration.com/products/Mustang-5-Lug-Conversion-Kits.
Answered by Tyler R. from Waco | Comment 0 0
Will the SSBC front and rear 5 lug conversion kit fit on a 1988 thunderbird turbo coupe? I know there are many parts that are interchangeable from a 87-93 mustang to a 88 tbird. I want to go to 5 lug and would prefer not to piece everything together.
Asked by John D. from Fenton | Comment 0 0
This kit does not include axle bearings or seals. We recommend part number AK-1563K for that. As for the wheels, this kit will work with the 5 lug 93 cobra replicas.
Answered by Karson S. from Hewitt | Comment 0 0
We do have an upgrade kit just for the rear that will upgrade to 94-04 style brakes in the rear, part number SVE-2320CAK-B, but it is a little more expensive than this kit that does both front and rear brakes. Depending on what style of wheel you are wanting to run you might look into a brake kit with 94-04 spindles and brakes for both front and rear like part number SVE-2300AK-B.
Answered by Nathan A. from Waco | Comment 0 0
Ford Mustang - 1987 (87) - 1988 (88) - 1989 (89) - 1990 (90) - 1991 (91) - 1992 (92) - 1993 (93)