Looking to add a Big Cubic Inch Forced Induction Stroker motor under the hood of your Mustang? These Scat engine rotating assemblies are a perfect basis to build your new 351 Windsor based power-plant on. This Scat 408 competition rotating assembly features a Scat forged 4340 4.000" stroke Crankshaft & Forged 6.200" H-beam connecting rods, with 7/16" cap screw bolts. For maximum power and reliability, Scat adds a set of rod and main bearings and tops it off with a set of Forged pistons & rings. These Scat competition rotating assemblies are designed to be used with 28oz. balance Flywheel and Harmonic balancer.
Compression Ratio Calculator:
NOTE: This kit comes un-balanced and must be balance with your supplied balancer and flywheel/flex-plate.
Scat enterprises was founding in the early 1960's by Tom Lieb. Since then, Scat has researched and developed aftermarket performance engine parts for a variety of different cars. Ranging from pistons, connecting rods, crankshafts, stroker kits, forged rotating assemblies, and many more engine internal, Scat has set the bar high within the automotive industry. They pride themselves in the high quality products the supply and the excellent customer service they are known for. Shop LatemodelRestoration.com to get your stroker kits and rotating assemblies to get your Mustang putting down serious horsepower.
Products by Vehicle
Upload a Picture
Upload your own picture of the Mustang Scat 408 Forged Rotating Assembly - Dished Pistons, H Beam Rods (82-95)
Please make sure to hold your device horzonally (like a camera) rather than vertical (like a phone).
By uploading an image, you agree to give LatemodelRestoration.com permission to use it in future advertisements and promotions.
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!
Purchased new in December of 2012. The wife fell in love with this color and I've gotta admit; I love it too! I take it to some local cruise-ins and car shows every Summer. My wife and I manage to tak...