SVE Drift Wheel Kit
This SVE Drift wheel kit for your 2005-15 S197 or S550 Mustang is a great way to add aggressive looks to your muscle car! This kit includes (4) Flat Black 19X9.5 five lug SVE Drift wheels for a great look on your S197 o...
Diameter 19"Width 9.5"Lugs 5Offset +33 mm.Backspacing 6.5 in.Bolt Circle 4.5 in.
Race Inspired Looks
This 2005-2014 Mustang RTR 19x9.5" wheel kit is the perfect way to add track ready looks to your S197. These wheels are the same wheels found on the famous RTR, Ready To Rock, Mustang designed by Vaughn Gittin Motorsports. Featuring a multi-spoke design, these 5-lug wheels are perfect for drag racing, road racing, show cars, or daily driving. Add a set of lowering springs to give your Mustang a great stance to compliment these new wheels!
High Quality Design
RTR wheels are made of high quality cast aluminum and are powdercoated in Matte Charcoal for a durable finish that is built to last. With a width of 9.5", you can get the perfect size tires to increase the performance of your S197. Pick up an RTR rear valance, splitter, spoiler, and side splitter to complete the look on your 2005-2014 Mustang!
-Weight: 28lbs Each
-RTR Center Caps Included
2007-2012 Mustang TPMS Info
In 2007 Ford introduced a Tire Pressure Monitoring System (TPMS) on the Mustang using a band mounted sensor. This design was lackluster at best & really put a sour taste in the Mustang enthusiasts mouth with TPMS. Although Ford won't be doing away with TPMS, they did make an improvement that all will appreciate. For the 2010 Mustang, Ford went to a Schrader Valve mounted TPMS sensor that makes for much easier installation. This same sensor carries over to the 2011-2012 Mustang. These new sensors are not compatible with 2007-2009 Mustang.
Customer Photos (4)
Product Reviews (1)
5.0 out of 5 stars - based on 1 reviews
Sharp looking wheels!
christian j. on
I purchased these RTR wheels last Fall. The fit and finish of these is outstanding to say the least. They look right at home on my 13" GHIG GT. As always, Late Model Restoration has great customer service and took care of me as one of the wheels was slightly damaged during shipping. I highly recommend these if you're on the fence. I debated between these wheels and some lower priced options for 6 months or so before I pulled the trigger on these and I'm glad I did!
Upload your own picture of the Mustang RTR Wheel Kit 19x9.5 Charcoal (05-14)
Please make sure to hold your device horizontally (like a camera) rather than vertical (like a phone).
By uploading an image, you agree to give LateModelRestoration.com® permission to use it in future advertisements and promotions.
The wheel size is the diameter of the wheel, in inches, not counting the tire.
Modern tires in North America have several other measurements associated with their size.
A tire designated as a "225/70R14" denotes a tire with the following dimensions: width of tread: 225 mm; ratio of tire height to width: 70 percent; rim diameter: 14".
Therefore a 185/70R14 has the same rim diameter and aspect ratio, but a smaller overall diameter and narrower tread face than the 225/70R14.
The easiest way to measure backspace is to lay the wheel face down onto the ground so the backside of the wheel is facing up.
Take a straight edge and lay it diagonally across the inboard flange of the wheel. Take a tape measure and measure the distance from where the straight edge contacts the inboard flange to the hub mounting pad of the wheel. This measurement is the backspace.
The photo below shows three wheels with 2", 3", & 4" backspace.
Wheel Bolt Circle
The bolt pattern or bolt circle is the diameter of an imaginary circle formed by the centers of the wheel lugs. Bolt patterns can be 4, 5, 6, or 8 lug holes. A bolt circle of 4x100 would indicate a 4 lug pattern on a circle with a diameter of 100mm.
The diagram indicates the proper measuring methods. 6 lug wheels are measured like the 4 lug wheels.
The offset, measured in millimeters, can be negative or positive, and is the distance from the hub-mounting surface to the rim's true centerline. A positive offset means the hub-mounting surface is closer to the outside edge of the wheel; a negative offset means the hub-mounting surface is closer to the inside edge of the wheel. Offset affects the scrub radius of the steering and it is advisable to stay within the limits allowed by the vehicle manufacturer. If tires are fitted which are significantly wider than those specified by the manufacturer, a compromise may have to be adopted whereby a wheel with less offset is used to prevent the tire rubbing on the suspension.
Wheel Lug Pattern
Wheel lugs or bolt pattern is merely the number of bolts or lugs on the wheel. As the bolts will be evenly spaced, the number determines the bolt pattern. For example, most U.S. passenger cars have 5 bolts while compact models sometimes have only 4 and pick-up trucks can have as many as 6 or 8.
LMR is a great company with great products. I recently purchased the Gibson Catback exhaust for my 2015 Mustang Ecoboost and I love it. Easy to install, great looking tips, and best of all almost half the price than competitors systems. My main reason I decided to go with Gibson was because off the reputation and because I think after searching all the exhaust systems, their exhaust system is probably the best sounding one. No raspyNess what so ever you expect from a 4 cylinder exhaust system. It's a nice low, deep tone.