Allows Optimal Ring Seal Protects Rotating Assembly Components
Highly Refined Mineral Oil
Also Has Advanced Additives For Reduced Wear
In The Box
(5) Quarts of Royal Purple Break-In Oil
Engine builders using flat-tappet cams have grown increasingly concerned that many modern motor oils do not provide adequate wear protection for new engines, particularly those using flat-tappet cams. Royal Purple has addressed this issue by developing a new engine break-in oil.
Royal Purple Break-in Oil is formulated to allow optimal ring seal and protect rotating assembly components such as the camshaft and valve train from initial start up wear. Royal Purple combines highly refined mineral oil, preferred for engine break-in, with advanced additives containing high levels of zinc and phosphorus to optimize protection in flat-tappet and roller engines.
Royal Purple Break-in Oil is fully formulated and does not require the use of any other chemical additives. Royal Purple recommends using their high performance motor oils after the engine is broken in for maximum engine performance.
Royal Purple - Unleash The Power
The most frequent comment from customers is how they can feel the difference in their vehicles after switching to Royal Purple. For instance, Royal Purple Motor Oil typically improves horsepower and torque up to 3%. It also reduces fuel consumption by as much as 5% and typically reduces emissions 20% or more. Performance gains will vary depending on the type of vehicle, its condition, and the way it's driven. Shop Latemodel Restoration to get all of the Royal Purple oil and lubricants you need!
Products by Vehicle
Upload a Picture
Upload your own picture of the Royal Purple Break-In Oil Kit
Please make sure to hold your device horzonally (like a camera) rather than vertical (like a phone).
By uploading an image, you agree to give LatemodelRestoration.com permission to use it in future advertisements and promotions.
Everything was great. From shipping to easy ordering !!!
1983 Mustang G.T. I got it with a blown motor, and replaced the boat anchor it came with with a Mountaineer short block. G.T. 40P heads, a Comp cams XE270HR cam, Edelbrock intake and carb, headers, e...