Some Low RPM Chatter During Street Driving Take Off
What's in the Box
(1 )Powergrip Pressure Plate
(1) 300/900 Series Clutch Disc
As power levels increase on your 2011-2014 5.0L Mustang, the 98955 RAM Powergrip Clutch meets the challenge. With a combination of 300 series organic (pressure plate side) and 900 series metallic (flywheel side) clutch disc friction surfaces, the torque capacity is increased to the 500lb-ft level. It is built to handle sticky tires as well!
The 8-spring hub is equipped with RAM POLYCOIL damper springs encapsulated in polyurethane. This spring can handle three times the shock load of just a normal coil spring, and is standard in all RAM Powergrip discs. The RAM Powergrip pressure plate in this 2011-2014 Mustang Clutch Kit provides 30% more clamp pressure than stock, and meets SFI specifications. At this high level of performance, the 98955 2011-2014 Mustang 5.0L RAM Powergrip Clutch provides surprisingly good driving characteristics with smooth, comfortable driver control.
This Mustang Clutch is compatible with the factory Hydraulic Release Bearing.
A Billet Flywheel is highly recommended for this clutch kit.
Ram - Clutches, Clutch Kits, & Billet Flywheels
For over 35 years, RAM has produced the world's top performing competition and street performance clutch systems. They have developed, improved, and produced in house, tried and true clutch components and systems that provide the highest performance value for your Mustang. Today, every RAM product incorporates critical features that are absent from many of the products of those who choose to compete with them. Shop Latemodel Restoration to get performance RAM clutch kits, flywheels, and pressure plates.
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!