Welded Reinforcement Plates At Crossover For Longer Life
Scavenging Effect Increases Horsepower
Smooth, Mandrel-Bent, 409 Stainless Steel Pipe
Bolt-on Connections For Ease Of Installation
2.5" Exhaust Tubing
What's in the Box
All of Pypes street legal Mustang catalytic x-pipes utilize small, but mighty, 5.0 litre ODBC compliant, catalytic converters. They out-flow most performance mufflers and weigh a mere 2.5 lbs. These are designed specifically to give your Mustang a major wake-up call in both sound and performance. The modular design of these x-pipes allow for conversion from off-road to street-leal and back to off-road with optional cat-delete pipes. Pypes' Catalytic Converter X-pipes will pass emissions inspections in most states. Check your local and state regulations for installation and usage guidelines. Gain 8-12 HP and a unique sound!
Pypes Mustang X-Pipe Science
Since Mustang V8’s fire unevenly, exhaust gasses exit in pulses rather than a steady flow. While one pipe is filled with pressure the other pipe is relatively pressureless but the connecting of the two pipes in a siamese pattern allows pressure to be released to the other side. This action allows the exhaust to pass through the pipe quicker and this better ‘breathing’ increases horsepower.
High quality, exceptionally versatile design and performance define Pypes' x-pipe product line. They are a proven winner when it comes to bumping up the horsepower of your Ford Mustang. There’s no skimping on materials here. All Pypes x-pipes include dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest quality materials, Pypes' smooth, seam-coated, mandrel-bent, 409 Stainless Steel pipe resists corrosion and extends the life of your Mustang's exhaust system.
I order Xpipe because my stock catted was burn and start to block up the flow of air but didn't expected the sound and throttle response of my car which I love and the fitment was great once I cut the 8.5 inch the catted fit right up but the only down side I wish that Pypes should send some nuts and bolt got to mount the mid pipe to my cat back I had to run to the auto store and get 4 longer bolt to fit. My set up is stock header, pypes mid pipe with catted and magnaflow magnapack cat back
Was this review helpful to you?
exactly what i wanted
johnny s. on
It took a little while to have it delivered because of the holiday weekend and it was backordered, it was shipped directly from pypes. The sound is great, the fitment was perfect. The midpipe is xfm33 and latemodel says it fits 96-98 2v gt. Just in case you were in the same boat i was after some research this also fit my 98 Cobra. Assuming 98 is the same as 96-97 it should fit.
If you're working on a Latemodel Mustang, Pypes' innovative products, and superior quality allow you to make your exhaust purchase with absolute confidence that you are getting the best materials, best fit and best value available anywhere. Pype's aftermarket performance exhaust components give your Mustang more horsepower and torque while adding a great new exhaust tone. These x-pipes, h-pipes, headers, and cat back kits are direct fit and 100% bolt on, making installation quick and easy.
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!