1983-95 Ford Mustang 5.0 5.8 Prothane Urethane Motor Mounts

Mustang Prothane Urethane Motor Mounts (83-95) 5.0 5.8

Details   |  Description   |  Customer Photos   |  Reviews
Mustang Prothane  Urethane Motor Mounts (83-95) 5.0 5.8

Add these Prothane 5.0/5.8 Urethane Engine Mounts to your 83-95 Mustang for added strength and durability.

Item #PT-6501BL

Everyday Low Price: $139.99

In Stock
Ships today!

Add to cart


  • Longer Lasting Mounts Than Original
  • Hold Up To Extreme Conditions Better


  • Steel Contstructed Housing
  • Urethane Insulation
  • Prothane Quality
  • Fits 1983-95 Ford Mustang 5.0/5.8L

What's in the Box

  • (1) RH Side Urethane Motor Mount
  • (1) LH Side Urethane Motor Mount

Made in the USA

Product Description

Prothane urethane motor mounts for your 1983-95 Mustang 5.0L are steel reinforced and insulated with urethane. Urethane mounts have higher resistance to oil-soak and temperature changes. Urethane deflects less, so the mounts are stronger than rubber, yet they offer insulation from noise and vibration that solid mounts don’t.

Need Motor Mount Nuts and bolts? Look here at this handy hardware kit!

NOTE: Urethane mounts may raise height of engine. Check hood for interference when installing these mounts.

**CAN be used on 79-82 Fox Mustang K-members if the stud mounting hole is enlarged and the locating pin is removed.**

1 Customer Photo

Community Q&A

Have a question about this item?
Ask the community

Customer Reviews

out of 5 stars
5 stars
7 reviews
5 stars    7
4 stars    0
3 stars    0
2 stars    0
1 star    0

7 of 7 REVIEWS
7 of 7 REVIEWS

  Nice Upgrade
By on 2/17/2014
These Do A Great Job Of Stiffening Things Upfront But Don't Give You As Much Noise And Vibration As Solid Mounts. Well Worth The Money!!!

Yes, I would recommend this item to a friend!

Was this review helpful to you?

  Great replacement over rubber mounts!
By on 9/9/2014
I was noticing a bad clunk from my 5.0 when I gave it a shot of throttle in 5th. Replaced the motor mounts and transmission mount with Prothane urethane ones and the problem is gone. Admittedly, some new OEM rubber mounts would have worked too, but this added something else to the car I wasn't expecting. When I used to step on the throttle hard, there would be a bit of a lag/slingshot effect. Now, the power is fed so much more directly; it's like it woke up the car suddenly.

If you're worried about vibrations, they aren't unbearable. At idle, I get a slightly noticeable vibration to the car that can be felt through the pedals (nothing really annoying). Then it's smooth up until about 3k RPM and then the vibrations pick up a bit, but again, nothing unpleasant. If you were looking for a silky smooth ride, you would have bought a Cadillac in the first place. This is all being said with only having put on about 30km on the car since they were installed. I figure after a couple of weeks, it should smooth out even more.

If your mounts are shot, I recommend these as a replacement. I can't say I'd recommend them just as a "performance" upgrade though, unless maybe you drag race the car frequently.

Yes, I would recommend this item to a friend!

Was this review helpful to you?

  Wow this are rock solid!
By on 7/28/2014
Pulling stock motor outta my 86 stang so needles to say the mounts are toast. The quality brought a huge smile to my face. Will not be worried about the motor moving around with these mounts!

Yes, I would recommend this item to a friend!

Was this review helpful to you?

  Great product.
By on 7/29/2014
I highly recommend these mount. They are very well made and are aggressive enough for the motor they are going on. Thanks late model restoration for great products!

Yes, I would recommend this item to a friend!

Was this review helpful to you?

  Good Product
By on 2/10/2014
Better than the solid mounts I had previously... good fit and finish, a little heavy but not much loss in response for the much improved NVH

Yes, I would recommend this item to a friend!

Was this review helpful to you?

  Best engine mount money can buy
By on 5/31/2014
These are just awesome mounts, great quality and fit. If you don't want to spend money ever on engine mounts get these.

Yes, I would recommend this item to a friend!

Was this review helpful to you?

  Great fit!
By on 9/4/2014
Great fit! Looks like a high quality product, no worries about these breaking.

Yes, I would recommend this item to a friend!

Was this review helpful to you?

Vehicle Applications

Ford Mustang - 1983 (83) - 1984 (84) - 1985 (85) - 1986 (86) - 1987 (87) - 1988 (88) - 1989 (89) - 1990 (90) - 1991 (91) - 1992 (92) - 1993 (93) - 1994 (94) - 1995 (95)

About This Brand

Lifted or lowered suspensions, increases in horsepower, plus-size wheels and tires can subject traditional rubber suspension bushings to forces beyond their limits. Control arms, strut arms, leaf springs, body mounts, motor mounts, transmission mounts, sway bars and shocks all control movement and maintain alignment but the rubber bushings they use are designed for more "middle of the road" use. Rubber also deteriorates over time, further reducing control. This contributes to premature component failure, a "spongy" ride and less than ideal performance handling. Urethane bushings can correct these conditions, and improve drivability in your Mustang or Ford Lightning.

Look for Similar Items by Category

Ford Mustang Parts » Mustang Engine & Underhood » Mustang Crate Engines, Blocks, & Motors » Mustang Motor Mounts
1979-1993 Mustang Parts » 1979-1993 Mustang Engine Parts » 1979-1993 Mustang Motor Mounts
1994-2004 Mustang Parts » 1994-2004 Mustang Engine Accessories » 1994-2004 Mustang Motor Mounts

Products by Vehicle