Your Mustang is built using rubber bushings in control arms, motor mounts, transmission mounts, sway bars, spring isolaters, and struts. Rubber bushings are soft and pliable. They offer superior insulation from noise and harshness, but they cost you in parformance and durability. Urethane is a harder, more durable substance. When used in suspension components and drivetrain mounts, they provide increased performance due to the lack of deflection as well as increased durability and resistance to contaminating fluids such as oil and transmission fluid. Prothane is dedicated to producing the highest quality urethane components on the market today. All of Prothane's products carry a manufacturer's limited lifetime warranty against defects in materials and workmanship.
Prothane Total Kits Include:
-Outer Tie Rod End Boots
-Front Anti-Sway Bar End Link Set
-Upper Strut Mount Bushings
-Rear Spring Isolators
-Front Spring Isolators
-Front Control Arm Bushings
-Rear Upper & Lower Control Arm Bushings
-Upper Rear Axle Bushings
-Non-Offset Steering Rack Bushings
This total kit includes front control arm bushings for both hydro-bushing & standard bushing front control arms. The rear controla rm bushings feature the oval lower front bushing.
Due to the various sway bar sizes available, sway bar mount bushings are sold seperately
Lifted or lowered suspensions, increases in horsepower, plus-size wheels and tires can subject traditional rubber suspension bushings to forces beyond their limits. Control arms, strut arms, leaf springs, body mounts, motor mounts, transmission mounts, sway bars and shocks all control movement and maintain alignment but the rubber bushings they use are designed for more "middle of the road" use. Rubber also deteriorates over time, further reducing control. This contributes to premature component failure, a "spongy" ride and less than ideal performance handling. Urethane bushings can correct these conditions, and improve drivability in your Mustang or Ford Lightning.
Well me and my girlfriend had a day off and decided to take a road trip to Late Model Restoration. Let me tell you, we had the best CUSTOMER SERVICE ever. Jay was very helpful and knowledgeable about the parts I purchased. The showroom was clean and inviting. Also I got to meet JMAC that host's all of their YouTube videos. They also had project BLUE COLLAR in the parking lot, and it is NICE. I will recommend Late Model to everyone I know...
My 2004 Mustang
It has a 3-9, V-6 motor, BBK cold air induction, prediator chip, Ford 3.73 racing Gears, Lots of chrome under the hood,Has a Calif Tonneau cover over the rear seats to give it the roa...