The new Typhoon intake system for the 1999-2004 Mustang 4.6L 2V is a sensational manifold. Developed in conjunction with one of the leading Mustang specialists, this manifold has been dyno proven to produce 23 more horsepower than a stock manifold at 6,300 RPM with similar increases all the way through the RPM range.
This manifold features a three piece design that allows easy access to the bottom and the middle of the plenum chamber along with the runners for those who want to do their own additional port and plenum fine tuning.
The manifold is designed as a bolt-in replacement for all 1999-2004 4.6L 2V Mustangs and uses the stock alternator and all other stock engine accessories.
*The manifold can be used on 1996-1998 engines if 1999-2004 PI cylinder heads are used.
I bought this intake manifold a couple months ago, finally got all the parts I was waiting to install.
The Good: The instructions were really good/easy to follow(minus the spelling mistakes). It's a great looking upgrade. I feel better knowing it's stronger than the stock plastic manifold.
The Bad: It was a tight fit. I would suggest you make sure the bolts for the thermostat are lined up before tightening any bolts down. The Aluminum strips easily, so be careful when torquing them down. I did notice a power increase and good throttle response, but I did install a few other upgrades at the same time, so I can't quite narrow down the gains from this product.
Professional Products - The Precision Line of High Performance and Racing Products
Latemodel Restoration Supply is proud to offer Professional Products products for your project.
Professional Products uses the latest manufacturing techniques and they use the best materials available. When you buy Professional Products, you get top technology with first-class finishes, at prices that are almost always much lower that "the other guys!" Choose from performance intake manifolds, plenum, throttle body, fuel rails, balancers, engine bolt kits, and many more engine components.
Products by Vehicle
Upload a Picture
Upload your own picture of the Mustang Professional Products Typhoon Intake Polished (99-04) 4.6
Please make sure to hold your device horzonally (like a camera) rather than vertical (like a phone).
By uploading an image, you agree to give LatemodelRestoration.com permission to use it in future advertisements and promotions.
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!
My 2004 Mustang
It has a 3-9, V-6 motor, BBK cold air induction, prediator chip, Ford 3.73 racing Gears, Lots of chrome under the hood,Has a Calif Tonneau cover over the rear seats to give it the roa...