SPEAKER 1: The Performance Distributors LiveWires are an excellent addition to the Hot Forge Distributor and the Screamin' Demon coil, because they'll get all that extra spark energy to the spark plug. They feature a very low resistance, about 300 to 350 ohms per foot. They're spiral-wound so you don't end up with any radio interference.
They have heat-shrinked ends to keep the moisture out of the boots, a heat braid that is a good up to about 1,400 degrees, and they're also cut to length and numbered for each cylinder, making them the best plug wire for your Mustang.
Replacing your spark plug wires is very simple and doesn't require a whole lot of thought. However, I do want to point out a couple of things that you want to keep in mind-- namely, the firing order and then how to remove the spark plug wires from the spark plugs.
Now starting on the passenger side, at the front, you have cylinder number one. Then two, three, and at the back is number four. Then moving over to the driver's side, you've got cylinder number five at the front, and six, seven, and number 8 is at the very back next to the firewall. Now on top of the cap, the firing order is one, three, seven, two, six, five, four, and eight. The coil is in the center. Now to remove your spark plug wire, it would be easier to give the boot a twist and then pull it away.
Now these Performance Distributors LiveWires fit great and didn't take long to install. Now when changing out spark plug wires, it's a great time to go ahead and change out your spark plugs. Now for more ignition components for your Mustang, check out latemodelrestoration.com