Enhance the performance of your Mustang V6 by replacing the stock coil with our high voltage Screamin’ Demon Coil! Designed to produce an exceptional spark throughout the entire RPM range with virtually no drop off in power!
Mustang V6 owners can now increase the spark intensity of the 3.8 liter ignition by installing Performance Distributors' new Screamin' Demon Coil! This is the first high performance coil available for the 2001-2004 Mustang 3.8L V6 engines.
The Screamin' Demon Coil is designed to produce a longer duration spark and allow plug gaps to be opened up to an astounding .060" - .065"! This will burn the fuel mixture more efficiently for increased performance and better fuel mileage. This will also help spark plugs stay cleaner longer. In addition, the intensity of the Screamin' Demon's spark does not drop off as the rpm's increase, which is common with stock ignition systems. In a series of 0-60 mph tests, we improved our E.T. an average of .33 seconds over the stock ignition coil! That's performance you can feel in the seat of your Mustang V6!
The Screamin' Demon Coil is epoxy filled, leading to improved heat transfer and vibration resistance. The Screamin' Demon Coil is easy to install and mounts in the original equipment location.
Founded in the mid 1970's by the late legendary racer and ignition wizard Kelly Davis, Performance Distributors has established a record of product innovation unrivaled by its competition.
Thanks to an aggressive R&D program, Performance Distributors has developed the industry's most advanced line of high-performance and racing ignition systems. Performance Distributors was the FIRST company to make a performance H.E.I. distributor. That's why they are always technologically advanced over their competitors. Br> Latemodel Restoration carries a wide selection of performance distributors, ignition coils, modules, coil packs, and spark plug wires to get your Mustang's ignition system running better than ever!
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!
My 2004 Mustang
It has a 3-9, V-6 motor, BBK cold air induction, prediator chip, Ford 3.73 racing Gears, Lots of chrome under the hood,Has a Calif Tonneau cover over the rear seats to give it the roa...