Ford Mustang 4 Gauge Power Wire Premium Kit w/o Noise Suppression 3G by PA Performance

Mustang 4 Gauge Power Wire Premium Kit w/o Noise Suppression 3G

Details   |  Description   |  Videos   |  Reviews   |   Community Q&A
Mustang 4 Gauge Power Wire Premium Kit w/o Noise Suppression 3G

Fits 1986-93 3G alternators. Premium kit includes noise suppressor while the standard kit does not.

Item #PA-9903

Everyday Low Price: $44.99

In Stock
This item is not returnable once purchased
Please refer to our Return Policy policy for more information.

Add to cart


  • Carries higher loads than factory wire


  • #4 Gauge wire
  • Increased number of wire strands

What's in the Box

  • (1) 10' #4 gauge wire
  • (1) Fuse Block
  • (1) 200 Amp Fuse
  • (2) Sheet metal attaching screws
  • (7) Zip ties
  • Install Instructions

Product Description

This is a complete kit to upgrade the main power feed wire from the alternator to the vehicle on most Fords. Basically, the OEM wire from the alternator to the vehicle was not designed to carry the added load of higher amp alternators. If you use the stock wires again or not is your choice, but using this large (#4 Gauge) wire kit will add the safe carrying capacity needed for lengths up to 10 feet. When using our high output alternators you must upgrade this cable to retain warranty coverage.

For vehicles where the alternator and starter relay/battery are on the opposite side of the vehicle, the LONG kit is required. Examples would be 87-93 Fox Body Mustan

LONG Kits include: large #4 ultra-flexible Stereo Grade wire with sealed 360° crimped terminals, 200 amp in-line fuse and holder with mounting screws, protective wire loom and wire ties to secure it and Instructions with pictures.

Standard kits made of high-grade wire. This wire offers outstanding performance, cosmetics and flexibility at a reasonable price. It looks like the Premium wire but is not electrolytic copper. Most people building horsepower only cars use this option.

These kits can also be used on upgrades utilizing alternators from any other manufacturer with a 3/16-threaded battery (+) stud from the alternator. The ring terminal on the alternator side is 1/4 I.D.

#4 gauge wire kits are recommended on all upgrades but required when upgrading any 1993 or older vehicle with a 130-amp or 200-amp alternator

All kits are provided with 200-amp Littlefuse Brand Fuse and Holder. Based on Littlefuse performance specifications and tolerances this is the appropriate rating. Please do not increase or decrease the fuse amperage value

Red cable shown, actual cable is CLEAR jacket.

THESE KITS ARE NOT INTENDED TO REPLACE THE OEM WIRE – but are large enough to work without the stock wire in race / kit applications where there is no other wiring to upgrade. There are many opinions on the internet about cable use. By using both the stock and the larger cable, everything that worked before the upgrade will still work. The bottom line, at least you must use the #4 wire kit when upgrading alternators.

Product Videos

Mustang 130 Amp Alternator Install (87-93)

Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!

Product Reviews (2)

out of 5 stars
3 stars
2 reviews
5 stars    0
4 stars    1
3 stars    0
2 stars    1
1 star    0

1 of 2 REVIEWS
1 of 2 REVIEWS

4 Stars   Convenience is the key here
By on 8/1/2014
The wire fits great, and is actually 4 gauge which is a problem with some other '4 gauge' wires..they end up being smaller. The fuse is securely attached inline, unlike one of the clear fuse holders that uses the big tube style fuse. Though it is convenient, I don't know if the value is here, since the sum of the parts can be had for less if you shop it out piece by piece..but this is a time saver and quality construction.

Yes, I would recommend this item to a friend!

Was this review helpful to you?

2 Stars   A little disappointed
By on 3/31/2014
I bought this wire in order save the time from fabricating my own. Unfortunately when I received the wire it was missing the heat shrink tubing shown in the photo. I ended up adding the tubing myself...

Was this review helpful to you?

Community Q&A (2)

Vehicle Applications

Ford Mustang - 1979 (79) - 1980 (80) - 1981 (81) - 1982 (82) - 1983 (83) - 1984 (84) - 1985 (85) - 1986 (86) - 1987 (87) - 1988 (88) - 1989 (89) - 1990 (90) - 1991 (91) - 1992 (92) - 1993 (93) - 1994 (94) - 1995 (95) - 1996 (96) - 1997 (97) - 1998 (98)

About This Brand

PA Performance
The owners and partners of PA-Performance have been building, customizing and modifying their own vehicles for almost 20 years. Over these years, they have researched and designed high quality charging system parts for Mustangs ranging from alternators, starters, and starting system wiring harnesses. Choose from direct replacement stock or upgraded alternators to get your Mustang running good as new!

Look for Similar Items by Category

Ford Mustang Parts » Mustang Engine & Underhood » Mustang Alternators & Parts » Mustang Alternator Parts
1979-1993 Mustang Parts » 1979-1993 Mustang Engine Parts » 1979-1993 Mustang Accessory Drive » 1979-1993 Mustang Alternators & Parts

Products by Vehicle