MSD Tach Adapter
When installing an MSD ignition control on your 1979-1985 Mustang and the tachometer, fuel pump relay, and electronic fuel injection isn't working, you may need an MSD tach adapter. This is due to the trigger signal not being strong enough to trigger both the MSD and the factory's components. This adapter is a quick and easy to wire in and will have your tachometer working great again! The PN 8920 will correct the operation of most voltage-triggered tachometers that do not work directly off the tach output terminal of the MSD Control. This Adapter should also be used on current-triggered tachs (hooked in series with the ignition switch).
MSD Ignition products are the finest ignition components you can install on your Mustang or SVT Lightning whether it's a daily driver, Road Racer, a seven second Pro Stock car or Big Foot. MSD is your exclusive performance ignition company and we thank you for your interest and support. Latemodel Restoration has you covered with MSD ignition kits, ignition boxes, distributors, coils, and other high performance ignition components.
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!