Superior design, engineering, and manufacturing; all done in the U.S.A!
Polyurethane Bushings on Chassis End
Teflon lined Spherical Bearing on Axle End
Bolt On Installation
What's in the Box
(1)Rear Lower Control Arm Pair
The MM Heavy-Duty Rear Lower Control Arms for your 1979-98 Ford Mustang utilize specially designed 3-piece urethane bushings at the chassis end. These bushings have a hard center section to prevent fore and aft deflection, and softer outer sections to allow the angular motion necessary to prevent bind. This design, with softer outer urethane sections, prevents torque-box damage due to binding of the lower control arms. At the axle end, we use a high quality Teflon-lined spherical bearing to precisely locate the rear axle. Unlike the other bushing types listed above, a spherical bearing allows freedom of motion for both pivoting and angularity. As with our 3-piece urethane bushings, this freedom of motion improves handling over other styles of bushings, and prevents damage to chassis components.
We place the 3-piece urethane bushing at the chassis end, rather than at the axle end, for two reasons. First, this reduces the amount of noise, vibration, and harshness (NVH) that is transmitted into the chassis. Second, because the spring is mounted to the control arm and the chassis, it is best to keep the control arm and chassis from getting too far out of line with each other. If the spherical bearing is placed at the chassis end of the control arm and the urethane at the axle end, the control arm will tend to stay in alignment with the axle. This would cause the spring to arc sideways with body roll, and change the effective wheel rate.
Control Arms do not include hardware, you can re-use your stock hardware or purchase new hardware.
Maximum Motorsports is well respected as a leading developer of suspension systems and performance parts for your Mustang or Lightning. Established in 1992, the team at MM has spent countless hours researching and developing the highest quality suspension components for 1979-Present Mustangs and 1993-Present SVT Lightnings. Maximum Motorsports has strived to produce lightweight, direct replacement suspension parts to get your vehicle handling, launching, and cornering better than ever. Shop LatemodelRestoration.com for performance panhard bars, k-members, subframe connectors, steering racks, caster/camber plates. chassis braces, control arms, roll bars, wheel spacers, and other tubular suspension parts.
LMR is a great company with great products. I recently purchased the Gibson Catback exhaust for my 2015 Mustang Ecoboost and I love it. Easy to install, great looking tips, and best of all almost half the price than competitors systems. My main reason I decided to go with Gibson was because off the reputation and because I think after searching all the exhaust systems, their exhaust system is probably the best sounding one. No raspyNess what so ever you expect from a 4 cylinder exhaust system. It's a nice low, deep tone.