This part ships for FREE via UPS Truck Freight shipping!
Provides added safety
Increases chassis strength
NHRA & NMRA legal
Designed to fit with the stock Mustang interior
What's in the Box
(1) Roll Cage Assembly
Increase both safety and the rigidity of your 1979-93 Mustang's chassis with a Maximum Motorsports Roll Bar. Intended for the rigors of drag racing, these MM roll bars conform to NMRA and NHRA rules. Designed to fit with the stock Mustang interior, MM roll bars are also suitable for street-driven cars, especially if swing-out door bars are selected.
To keep delivery costs to a minimum, Maximum Motorsports designed these roll bars to ship with the rear braces detached. This requires a minimal amount of welding during installation to secure the rear braces to the main hoop.
For hardtop Mustangs, during installation the rear braces are bolted to the main hoop. This keeps the rear braces precisely aligned to the main hoop, allowing all welding to be done before the roll bar is installed in the car. This means you do not need to remove your car's interior to avoid damaging it while welding. To conform to the NHRA and NMRA rules, a qualified welder must use either the MIG or TIG welding process to weld the rear braces to the main hoop. We recommend that you get your own copy of the latest NHRA rules by calling them at 626/914-4761.
Contour-hugging 6" x 6" mounting pads with backup plates, better than any you've seen, sandwich the unibody for safe and strong mounting.
The front seats are accessed using Maximum Motorsports bolt-in or swing-out door bars. While both bars meet the NHRA rules, the swing-out door bars pivot outward, parallel with the doors, for easy entry. They can also be completely removed from the car in a matter of seconds! The bolt-in door bars are designed for easy initial installation (no welding), but are not intended to be removed.
Unlike some roll bars, our rear braces do not extend rearward of the centerline of the rear axle. This design maintains a crush zone at the rear of the car for optimum safety.
MM roll bars are uncoated, bare steel. For a high quality finish, the installer should paint or powder coat the roll bar after the welding is completed. Made of 1-3/4" diameter by 0.134" wall DOM tube (much stronger than the more commonly used 0.120" wall ERW seamed tubing).
Maximum Motorsports is well respected as a leading developer of suspension systems and performance parts for your Mustang or Lightning. Established in 1992, the team at MM has spent countless hours researching and developing the highest quality suspension components for 1979-Present Mustangs and 1993-Present SVT Lightnings. Maximum Motorsports has strived to produce lightweight, direct replacement suspension parts to get your vehicle handling, launching, and cornering better than ever. Shop LatemodelRestoration.com for performance panhard bars, k-members, subframe connectors, steering racks, caster/camber plates. chassis braces, control arms, roll bars, wheel spacers, and other tubular suspension parts.
I am new to the Ford game. I have been a Chevy man all my life ad just recently bought a 1992 Mustang LX convertible with the 5.0 engine. Found this site and bought several items so far. Everything was shipped promptly and arrived in good condition. I am finding out what everyone loves about LateModelRestoration. Great products at great prices. Only problem is I am spending too much money at this time, my wife is tired of me telling her about the things I am doing with the Mustang. She said she feels like the "other" woman now. I sure have enjoyed working on engines again, I didn't realize how much I missed it. Think I may just stay with Ford power after this experience, definitely be buying more products from LateModelRestoration.