This part ships for FREE via UPS Truck Freight shipping!
Provides added safety
Increases chassis strength
NHRA and NHRA accepted
Designed to fit with the stock Mustang interior
What's in the Box
(1) Roll Cage Assembly
Increase both safety and the rigidity of your 1979-93 Mustang's chassis with a Maximum Motorsports Roll Cage with bolt in door bars. Intended for the rigors of drag racing, these MM rollcages conform to NMRA and NHRA rules while still designed to fit with the stock Mustang interior.
To keep delivery costs to a minimum, Maximum Motorsports designed these roll bars to ship with the rear braces detached. This requires a minimal amount of welding during installation to secure the rear braces to the main hoop.
For hardtop Mustangs, during installation the rear braces are bolted to the main hoop. This keeps the rear braces precisely aligned to the main hoop, allowing all welding to be done before the roll bar is installed in the car. This means you do not need to remove your car's interior to avoid damaging it while welding. To conform to the NHRA and NMRA rules, a qualified welder must use either the MIG or TIG welding process to weld the rear braces to the main hoop. We recommend that you get your own copy of the latest NHRA rules by calling them at 626/914-4761.
Unlike most other roll bars for hardtop Mustangs, Maximum Motorsports rear braces mount to the strong compound curve of the rear inner wheel well, leaving space for the back seat.
MM roll bars are uncoated, bare steel. For a high quality finish, the installer should paint or powder coat the roll bar after the welding is completed. Made of 1-3/4" diameter by 0.134" wall DOM tube (much stronger than the more commonly used 0.120" wall ERW seamed tubing).
MM Nhra 6 Point Rollbar w/ Bolt-In Door Bars (79-93) Hardtop MMRB1
Daniel R. on
Took a little while to receive (drop shipped freight) but packaged nicely. Slip fit joints went together very easily. Nice fitment inside my '89 Mustang. The plates from the main hoop are bent in the corner to contour the floor but the backing plates are not. The 3/8 bolts they provide are not long enough in some places (main hoop and outside bolts on door bar plates). Overall, very happy with the fitment and quality of a NHRA legal bolt in roll bar with a reasonable price.
Yes, I would recommend this item to a friend!
Was this review helpful to you?
Josh B. on
i installed this cage into my 84 hatchback with no problems what so ever. Great fit, and compete custom look. but best of all serves its purpose. plan on doing a 6 to 8 point conversion. FAST DELIVERY!!!!!!!!!!!!!!
Maximum Motorsports is well respected as a leading developer of suspension systems and performance parts for your Mustang or Lightning. Established in 1992, the team at MM has spent countless hours researching and developing the highest quality suspension components for 1979-Present Mustangs and 1993-Present SVT Lightnings. Maximum Motorsports has strived to produce lightweight, direct replacement suspension parts to get your vehicle handling, launching, and cornering better than ever. Shop LatemodelRestoration.com for performance panhard bars, k-members, subframe connectors, steering racks, caster/camber plates. chassis braces, control arms, roll bars, wheel spacers, and other tubular suspension parts.
LMR is a great company with great products. I recently purchased the Gibson Catback exhaust for my 2015 Mustang Ecoboost and I love it. Easy to install, great looking tips, and best of all almost half the price than competitors systems. My main reason I decided to go with Gibson was because off the reputation and because I think after searching all the exhaust systems, their exhaust system is probably the best sounding one. No raspyNess what so ever you expect from a 4 cylinder exhaust system. It's a nice low, deep tone.