Tubular Control Arms
Maximum Motorsports 1979-93 Mustang front control arms set a new, higher standard of performance. Their engineering team designed these from a clean sheet of paper, which is why they are not only unique looking, but stronger than any others. MM control arms are gusseted in critical areas to ensure that the entire control arm will bend in an accident before a weld ever breaks. These control arms allow a tighter turning radius by allowing the tires to steer at a greater angle than the stock control arms. The MM control arms can be installed on a stock K-Member, or on most other aftermarket K-Members which accept stock control arms (some modifications are required to a stock K member).
- Fits 1979-1993 Mustangs
- Can only be used with a coil-over conversion kit; they do not allow the installation of springs in the stock location.
Purchased these MM tubular a arms to eliminate my tire rub and strengthen up the front end as well as dropping quite a bit of weight. The more aggressive angle of the a arms allows me to turn without rubbing due to my fox being lowered over 3 inches! No modification was needed to get it bolted into the stock k member! I paired these with a set of raceland coil-overs and it was a super simple install and the grease fittings will allow me to keep those unwanted squeaks at bay! Super satisfied! Couldn't be happier with my purchase! Recommend them to anyone looking to spruce up their front end suspension!
Yes, I would recommend this item to a friend!
Was this review helpful to you?
Jorge G. on
I ordered the a couple weeks ago and just put them on, they are a breeze to install and look awesome. Would recommend to anyone!!!
Maximum Motorsports is well respected as a leading developer of suspension systems and performance parts for your Mustang or Lightning. Established in 1992, the team at MM has spent countless hours researching and developing the highest quality suspension components for 1979-Present Mustangs and 1993-Present SVT Lightnings. Maximum Motorsports has strived to produce lightweight, direct replacement suspension parts to get your vehicle handling, launching, and cornering better than ever. Shop LatemodelRestoration.com for performance panhard bars, k-members, subframe connectors, steering racks, caster/camber plates. chassis braces, control arms, roll bars, wheel spacers, and other tubular suspension parts.
This is my '87 GT Convertible. It is only 1 of 164 made that year in a very rare color of Bright Regatta Blue Metallic. It has the factory 302 HO and has a Tremec T5 tranny. The odometer reads 125k mi...