1986-04 Ford Mustang 24lb Fuel Injector Kit w/ Adapters by Ford Racing

Mustang 24lb Fuel Injector Kit w/ Adapters (86-04)


Details   |  Description   |  Videos   |  Customer Photos   |  Reviews   |   Community Q&A
Mustang 24lb Fuel Injector Kit w/ Adapters  (86-04)

Upgrade your fuel system with this Ford Racing 1986-2004 Mustang 24lb fuel injector kit with adaptors.

Item #M9593LU24A-K

Your Price: $219.99

Market Price:$319.00
You Save 45.01 % ($99.01)

In Stock
Ships today!


Add to cart


Benefits

  • Upgraded Injectors
  • Adaptors Included

Features

  • More Fuel Flow
  • Uscar & Jetronic Compatibility

What's in the Box

  • (8) 24lb Fuel Injectors
  • (8) Fuel Injector Adaptors

Product Description

Looking to get more fuel into your 1986-2004 Mustang? This Ford Racing 24lb fuel injector kit is the answer! Stock 19lb injectors in your 4.6L and 5.0L motors can become damaged, clogged, or maxed out depending on the age of your car and the amount of power you are making. Upgrade to these bigger injectors to give your engine the gas it needs to run efficiently. The adaptors included in this kit allow you to use them on Uscar and Jetronic setups for an easy install!

Estimated Horsepower Ratings
Naturally Aspirated Applications: 326HP @ 85% Duty Cycle
Forced-Induction Applications: 251HP @ 85% Duty Cycle

See what our customers have to say about this product!
Check out customer reviews and questions.


Product Videos

Ford Racing Fuel Injectors & Kits - Mustang & SVT Lightning

Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!

Transcript

Customer Photos (3)



Community Q&A (9)

Show more questions

Product Reviews (7)


4.7
out of 5 stars
4.5 stars
7 reviews
5 stars    5
4 stars    2
3 stars    0
2 stars    0
1 star    0

86%
OF CUSTOMERS
RECOMMEND THIS PRODUCT
6 of 7 REVIEWS
RECOMMEND THIS PRODUCT
6 of 7 REVIEWS


5 Stars   24lb Ford EV6 injectors w/adaptors
By on 4/23/2014
Excellent product - purchased to replace trick flow disk type ev1 injectors which did not perform well due to overfueling during any throttle transitions. These perform much much better. Thanks

Yes, I would recommend this item to a friend!


Was this review helpful to you?

5 Stars   Easy install
By on 6/29/2014
I bought these 24lb injectors boosted response and power!

Was this review helpful to you?

4 Stars   New Style
By on 8/26/2014
Image uploaded by Steve O. Since you can't buy the older style injectors from Ford Racing... these are the next best thing. If your buying these for your 87 to 95 mustang, you have to get the intake spacer for it... they wouldn't fit under my GT40 intake.
The adaptors are the problem why they didn’t fit under the intake. I used the 3/8 inch spacer and no problems, plus the stock hood closed (I have a 1995 mustang... not sure about the 87-93, but I don’t see why it wouldn’t )


Yes, I would recommend this item to a friend!


Was this review helpful to you?

5 Stars   Awesome product, need prep work to fit on some models
By on 4/7/2015
Image uploaded by Edward M. I have a 95' GT that I upgraded to 24lb EV1 injectors with a matched BBK 76mm MAF calibrated for CAI and 24#. One injector failed so I was shopping and noticed that EV6 is compatible with just using adapters. Well, turns out the price of these injectors are 150$ cheaper than Accel 24lb EV1 injectors, so who wouldn't get these right? An upgraded injector that is cheaper? Sold!

Well, reading reviews I saw some customers had issue of upper plenum contacting the connectors of the injectors on driver side around #7 do to the adapter raising height by around 1/2". I pre-preemptively purchased a 3/8" spacer and anticipated I would need to modify my existing EGR tube. Doing a test fit, sure enough it is as customers have said, and the upper plenum contacts the #7 fuel injector connector, so I did the 3/8" spacer and modified my EGR tube to extend the needed height and fired it up.

I do not have a chip, stock tune with GT40X heads, XE264-12 cam, bolts ons, disconnected battery so ECM can relearn fresh with new injectors. So far after about 50 miles of driving I noticed the following:

Faster starts: I would have a hard start/prolonged cranking, especially after quick trips into the store. Varnish and gunk probably gummed up my old EV1 injectors from evaporation while parked during short trips/ stop and go driving.

I used to run very rich, noticeably smell rich and also would smell some fuel occasionally from exhaust but no backfiring or anything but would occasionally feel slight hesitation part throttle like I was loading up on fuel or something. I have adjustable fuel pressure regulator, with vacuum off I set to 40lbs. At time of installing all of this I also did new plugs, fuel filter, cap rotor wires, new 02 sensors. I was having issues with running very rich. Base timing 12*BTDC. So far with these injectors plus the tune up parts I no longer have any rich condition, no smell of fuel, no popping or hesitation. Idle quality is improved also. I have no check engine light, did about 25 miles of hard driving and then did KOEO/KOER and I have no trouble codes! Awesome!

I highly recommend these to anyone, regardless of whether you are stock or not, upgrade to EV6 in whatever injector lb rate you need; if you are stock then I recommend upgrade to EV6 19lb, if highly modified/forced induction get whatever pound rate you need in EV6, the multiple spray vs single pintle is great upgrade.

These come ready to install with O rings already on them!

Thank you LRS for selling such an amazing product for an awesome price!

Yes, I would recommend this item to a friend!


Was this review helpful to you?

4 Stars   great injectors
By on 4/24/2015
These seem to have no problem quenching that pony's thirst. The ev6 style inj. Does better at atomizing fuel. They have a demonstration online. Worth watching.

Yes, I would recommend this item to a friend!


Was this review helpful to you?

5 Stars   Easy breezy
By on 4/8/2015
Image uploaded by Brad F. Pretty straight forward install. Works great with my na build. No problems as of yet.

Yes, I would recommend this item to a friend!


Was this review helpful to you?

5 Stars   24 lb injectors
By on 3/5/2015
They were the perfect fit and worked prefect. Great parts !!

Yes, I would recommend this item to a friend!


Was this review helpful to you?

Vehicle Applications

Ford Mustang - 1986 (86) - 1987 (87) - 1988 (88) - 1989 (89) - 1990 (90) - 1991 (91) - 1992 (92) - 1993 (93) - 1994 (94) - 1995 (95) - 1996 (96) - 1997 (97) - 1998 (98) - 1999 (99) - 2000 (00) - 2001 (01) - 2002 (02) - 2003 (03) - 2004 (04)


About This Brand


Ford Racing
Ford Racing - Mustang Ford Racing Parts
Ford Racing is the leader in performance parts and accessories for Mustang and Ford Lightning.

LatemodelRestoration.com is proud to offer Ford Racing Performance Parts for your project. Ford Racing is dedicated to manufacturing the highest quality products offered in the industry. Choose from suspension, exhaust, wheels, and other performance parts at LatemodelRestoration.com. If you want the best for your Mustang or SVT Ligtning, look no further than Ford Racing Performance Parts!

Look for Similar Items by Category

Ford Mustang Parts » Mustang Air & Fuel Delivery » Mustang Fuel System » Mustang Fuel Injectors
1979-1993 Mustang Parts » 1979-1993 Mustang Air & Fuel » 1979-1993 Mustang Fuel System » 1979-1993-Mustang Fuel Injectors & Fuel Rails
1994-2004 Mustang Parts » 1994-2004 Mustang Air & Fuel » 1994-2004 Mustang Fuel System » 1994-2004 Mustang Fuel Injectors
Ford Mustang Parts » Mustang Tech & News » Mustang Project Cars By LatemodelRestoration.com » Project Blue Collar: Fox Body Mustang Restoration » 1993 Cobra Conversion Parts

Products by Vehicle