Replaces Stock Manifold With High Performance Manifold
Includes Custom N/A Tune
Composite Plastic Construction
Black Finish With Ford Racing Logo
Fits 2005-2010 Mustang 4.6L 3-Valve
What's in the Box
(1) Intake Manifold
(1) Custom Tune
Ford Racing Performance
This Ford Racing (FRPP) M-9424-463V performance intake manifold for your 2005-2010 S197 Mustang 4.6L 3-valve offers a lightweight composite construction (same material as OE intake manifold), high-flow runners and open plenum design. This intake will fit under a stock hood and will increase your 4.6L's powerband! Tested up to 2 bar pressure - great for use with forced induction vehicles! Has built in Intake Manifold Runner Control (IMRC) Delete [also called charge motion runner control CMRC delete]. You do not reuse your factory IMRC/CMRC plates and you do not need to purchase aftermarket IMRC/CMRC delete plates.
Note The M-9424-463V 4.6L 3-Valve Performance Intake Manifold normally shows flexing of the manifold body during normal operation with some fuel rail movement. Our testing shows this flexing will not lead to premature failure of the manifold, injector or injector gasket. Ford Racing will replace any M-9424-463V 4.6L 3-Valve Performance Intake Manifold that fails due to defects in workmanship or materials within three (3) years of the date of purchase. Proof of purchase will be required for submission of warranty claim. To the extent allowed by law, this warranty does not cover towing, shipping, removal, installation, rental vehicles, storage, loss of time, commercial loss, loss of use of vehicle, inconvenience, incidental or consequential damages, or other economic loss. Contact the Ford Performance Call Center at (800)367-3788 for details.
Must have an existing SCT tuner or purchase one separately.
Mustang GT Ford Racing Hot Rod Cam & Intake Manifold Install (05-10 4.6L)
Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
Published on 2014-07-24 Watch as we walk you through the simple process of purchasing a SVE Custom Tune for your 1996 to Present Mustang. This painless process will help you unlock the full potential of your Mustang thanks to our team of dedicated Mustang Tuners.
With an SVE Custom tune you will be able to add extra horsepower & torque all while keeping driveablity comfortable and factory like. Be sure to check out our complete line of SVE Tune by clicking on the link above. We carry tunes for the following Mustangs:
Published on 2015-05-18 The Ford Racing Hot Rod Cams were designed with a few things in mind, to increase horsepower and torque across the entire power band and add some serious bumpty-bump to your three valve Mustang! These camshafts are engineered for naturally aspirated and supercharged applications to cover a wide variety of engine setups. It is recommended that these cams be used with long tube headers to achieve significant power gains as well as a Ford Racing Intake Manifold and Throttle Body.
These Hot Rod Cams will increase lift from the stock 11mm/0.433” to 12mm/0.472. Intake and exhaust duration will be 221/240 degrees at 50 thousandths lift with a lobe separation of 110 degrees. You can still use your factory valve springs, followers, and lash adjusters up to 6800 rpms. You’ll need a timing chain wedge tool, valve spring compressor, and new cam phaser bolts prior to install and a custom tune IS required once you do get these cams installed. Lastly, Ford Racing does include thorough instructions with all needed torque sequences and specs.
The Ford Racing Intake Manifold will offer a lightweight composite construction, high-flow runners and an open plenum design. It will fit under a stock hood and will allow gains across the entire power band! Ford Racing has tested this intake up to 2 bar pressure which makes it a perfect addition for any of you guys with forced induction! It will even feature built in Intake Manifold Runner Control (IMRC) Deletes [also called Charge Motion Runner Control CMRC delete]. All needed hardware is included along with detailed installation instructions, and like the cams, a custom tune is required.
-Baseline Dyno- 281HP/309TQ
• 93 Octane • Custom Tune • Steeda CAI • BBK 62mm Throttle Body • Ford Racing Shorty Headers • Bassani Off-Road X-Pipe • Ford Racing 'Stinger' Catback • 3.73 Gears • 5R55S Transmission (5 Speed Auto) • One Piece Aluminum Driveshaft • 18" wheels/tires • Pull was made in 4th gear (1:1)
-After Dyno- 315HP/318TQ +34HP/+9TQ
• Ford Racing Hot Rod Cams • Ford Racing Intake Manifold • 93 Octane • Custom Tune (Re-flash) • Steeda CAI • BBK 62mm Throttle Body • Ford Racing Shorty Headers • Bassani Off-Road X-Pipe • Ford Racing 'Stinger' Catback • 3.73 Gears • 5R55S Transmission (5 Speed Auto) • One Piece Aluminum Driveshaft • 18" wheels/tires • Pull was made in 4th gear (1:1)
Ford Racing - Mustang Ford Racing Parts
Ford Performance Racing Parts is the leader in performance parts and accessories for Mustang and Ford Lightning.
LatemodelRestoration.com is proud to offer Ford Racing Performance Parts for your project. Ford Racing is dedicated to manufacturing the highest quality products offered in the industry. Choose from suspension, exhaust, wheels, and other performance parts at LatemodelRestoration.com. If you want the best for your Mustang or SVT Ligtning, look no further than Ford Racing Performance Parts!
Testimonial: The best company I have ever dealt with
LRS hands down is doing everything right. Every experience I have ever had with them shows just what an amazing company they are. There is a reason I come back time after time, instead of going to those "other" mustang aftermarket websites. Customer service is the name of their game, and they are winning. It does not matter whether you call, email, forum PM, or go to the actual store, they are always incredibly helpful and enthusiastic. (Getting to see the Cobra R in their showroom was awesome). I'm proud to have the LRS windshield banner on my car, because I know they will always have my back.