Stainless Steel Hard Line with Braided Stainless Flex End
Factory Type Connector Ends
What's in the Box
(1) Heavy Duty Replacement Clutch Fluid Line
From the factory, 2005-2014 Mustang GT, V6, Boss 302, & 2007-2012 GT500 are equipped with a plastic Clutch Fluid Line. This line runs from the Clutch Master Cylinder down to the Clutch Slave Cylinder/Clutch Release Bearing. While this plastic line is suitable for factory applications, many Mustang owners have experinced the failure of this Clutch Fluid Line at Racing Events. The high heat associated with Drag Racing or Road Racing, coupled with the higher effort Pressure Plate loads imposed by Performance Clutches causes the factory plastic line to split, rendering your Mustang Clutch inoperable.
Enter Ford Racing (FRPP) with their heavy duty Clutch Fluid Line. Developed for use on the FR500S & FR500CJ, the Ford Racing Clutch Fluid Line is a direct replacement for the factory plastic clutch fluid line on 2005-2013 Mustang GT & V6 & 2007-2012 Mustang GT500. It features Stainless Steel hard line construction with a braided stainless flexible end. The attachment fittings are factory type for a direct fit.
This is a highly recomended upgrade when using a High Performance Clutch Kit &/or when upgrading your Mustang Throwout/Release Bearing to the RAM-78715.
Ford Racing Performance Parts - Mustang Ford Racing Parts
Ford Racing is the leader in performance parts and accessories for Mustang and Ford Lightning.
LatemodelRestoration.com is proud to offer Ford Racing Performance Parts for your project. Ford Racing is dedicated to manufacturing the highest quality products offered in the industry. Choose from suspension, exhaust, wheels, and other performance parts at LatemodelRestoration.com. If you want the best for your Mustang or SVT Ligtning, look no further than FRPP!
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!