AS long as your stock lifters are not pitted or damaged on the roller end, then yes they are re-useable. If there is pitting or damage on the roller then you would need to get a new set.
Answered by Scott G. from hewitt | Comment 0 0
What is the recommended / max spring seat & open load pressure for these lifters. We have a nice little 306 going together with a set Renegade 195 AFR Heads , The cam specs are lift .574/.595 dur @ .050 236/248 on a 110lc . will this lifter work .
Asked by George J. from Conroe | Comment 0 0
Those will be fine to use. These will allow an increase in rev capability of 200-300 RPM over a stock set of lifters. Even with the specs on your cam you will be fine.
Answered by Jay W. from waco | Comment 0 0
Ford Mustang - 1985 (85) - 1986 (86) - 1987 (87) - 1988 (88) - 1989 (89) - 1990 (90) - 1991 (91) - 1992 (92) - 1993 (93) - 1994 (94) - 1995 (95)