Special Casting To Support Higher Horsepower Engine Builds
Updated Water Jacket For More Strength
Drain Plug For Faster Coolant Draining
Low Pressure Cast 319 Aluminum
Pressed-In Thing-Wall Iron Liners
92.2mm Bore Size
Cross Bolted Nodular Iron Main Bearing
Has Provisions For Piston Oil Squirters
What's in the Box
(1) 5.0 Aluminum Performance Block
High Performance Aluminum Block
If you are looking for a high performance aluminum 5.0 block to handle the high horsepower setup on your 2011-2014 Mustang, this Ford Racing 5.0 aluminum race block is the solution. This block has all new features to give you added strength and durability to hold up to higher horsepower builds. Modeled after the same 5.0L 4V TI-VCT motor that came stock in the 11-14 Mustang GT, this performance block is the ultimate upgrade when building your new engine.
High Quality Construction For Added Strength
To support the higher horsepower applications, this low pressure cast 319 aluminum 5.0 block features a special casting for added strength. The water jacket below the cylinder bore has been updated to add more material for durability. The intake side of the bore at the deck surface includes a cast in brace to improve strength of the cylinder wall and head gasket sealing. This block has provisions for piston oil squirters, pressed in thin wall iron liners, and cross bolted nodular iron main bearing caps. Has a 92.2mm bore size. Includes plugs and dowels.
Ford Racing Performance Parts - Mustang Ford Racing Parts
Ford Racing is the leader in performance parts and accessories for Mustang and Ford Lightning.
LatemodelRestoration.com is proud to offer Ford Racing Performance Parts for your project. Ford Racing is dedicated to manufacturing the highest quality products offered in the industry. Choose from suspension, exhaust, wheels, and other performance parts at LatemodelRestoration.com. If you want the best for your Mustang or SVT Ligtning, look no further than Ford Racing Performance Parts!
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!
My '13 3.7 PP. Sitting on SVE Progressive Rate Springs, SVE 93 Tune, SVT front and rear sway bars, Shelby Razor 20x9 wheels. Have a JLT CAI and Roush Axlebacks. Also, can't miss that LMR banner! Been ...