The Boss 5.0 block is a 4.6L deck height, 94mm cylinder bore cast iron block. The block uses a proprietary iron mix to yield the strongest possible casting strength with the least porosity and greatest consistency.
NOTE: The Boss 5.0L mod...
This part ships for FREE via UPS Truck Freight shipping!
Ford Racing 5.0 Modular Stroker Short Block
This Ford Racing 5.0 modular stroker short block is a great start to building a high horsepower engine for your 1996-2010 Mustang. This M-6009-A46X block is a 4.6L based modular short block bored and stroked to a 5.0 for a 21 cubic inch increase. It includes high quality forged internals to support high performance naturally aspirated, supercharged, or turbo charged Mustangs. Each aluminator block is hand assembled in the US with performance clearances.
High Quality Components
This motor is full of high quality forged internals that are made to handle the demand of any situation. With forged Eagle H beam rods, forged Mahle aluminum pistons, forged Eagle steel crankshaft, and a re-manufactured aluminum block, this motor is built to last. This motor also includes a new high pressure oil pump, and is a neutrally balanced rotating assembly.
- 2V PI Heads – 10.8:1 Compression ratio
- 3V Production Heads – 9.8:1 Compression ratio
- 4V – 9.6:1 Compression ratio
- Designed for 2, 3 or 4 valve cylinder head combinations (piston to valve check required depending on camshaft)
- Piston to Deck height clearance is 0.012" below (nominal)
- Recommended cylinder head fastener kits M-6067-D46 or M-6067-3V46 depending on application
- Assembled and ready for your heads, cam, and timing set
Recommended Ford Racing Components
M-6049-P46 - RH 2V Power Improvement (PI) Cylinder Head
M-6050-P46 - LH 2V Power Improvement (PI) Cylinder Head
M-6049-N3V - RH 3V production cylinder head - 12mm plug
M-6050-N3V - LH 3V production cylinder head - 12mm plug
M-6049-463VP3 - RH 3V CNC cylinder head - 12mm plug
M-6050-463VP3 - LH 3V CNC cylinder head - 12mm plug
M-6049-N3VPA - RH 3V CNC cylinder head fully assembled - 12mm plug
M-6050-N3VPA - LH 3V CNC cylinder head fully assembled - 12mm plug
M-9424-P46 - 2V Power Improvement (PI) Intake Manifold
M-9424-463V - 3V Performance Intake
M-6550-3V - 3V Hot Rod Camshafts
M-6067-3V46 - Head Changing Kit
M-6004-462V - 2V Camshaft Drive Kit
M-6004-463V - 3V Camshaft Drive Kit
Ford Racing - Mustang Ford Racing Parts
Ford Performance Racing Parts is the leader in performance parts and accessories for Mustang and Ford Lightning.
LatemodelRestoration.com is proud to offer Ford Racing Performance Parts for your project. Ford Racing is dedicated to manufacturing the highest quality products offered in the industry. Choose from suspension, exhaust, wheels, and other performance parts at LatemodelRestoration.com. If you want the best for your Mustang or SVT Ligtning, look no further than Ford Racing Performance Parts!
Products by Vehicle
Email Me When It's Back In Stock!
Email Me When It Arrives!
Upload a Picture
Upload your own picture of the Mustang Ford Racing 5.0 Modular Stroker Short Block (96-10)
Please make sure to hold your device horizontally (like a camera) rather than vertical (like a phone).
By uploading an image, you agree to give LateModelRestoration.com® permission to use it in future advertisements and promotions.
I live in Canada which makes getting parts more difficult due to shipping and availability. I decided to try late model restoration out as they are Canada shipping friendly. The order went smoothly and the parts arrived, and were exactly as i expected. Then a problem arose with one item. Now being in Canada this usually makes this a very painful experience to deal with due to the cost of shipping products back and forth across the border. Most of the time it is just easier and cheaper to just order a new one and cut the loses. Not in this case. I sent out an email with the issue and by the time I went outside to take a picture i already had a response. A new product was shipped out immediately. I could not believe how good the customer service was. This will be where i will get what i need for now on. Anyone can sell a product but it is nice to have a company stand behind what they sell. Thanks again.
I've done a complete engine swap from a 5.0 to a 5.8 Windsor motor that performs nicely. I've also upgraded the entire electrical system with MSD components as well . Future projects will include twi...