5.0L/302 - 340 Hp Gt-40 Aluminum Head Ford Racing Performance Crate Engine Assembly

Unlike the competition, some Mustang Ford Racing upgrades and crate motors are 50 State Street Legal and covered under WARRANTY when Ford or Lincoln Mercury Dealer installed and certain conditions apply. See www.fordracingparts.com for warranty information.

The primary enhancements to this engine include a new forged steel crankshaft, steel flywheel, steel damper and neutral balance rotating assembly.

302 cubic inch
340 hp @ 5500 RPM
9.0:1 compression ratio (nominal)
Neutral balance rotating assembly
Forged steel sportsman crankshaft
Billet steel SFI approved flywheel M-6375-A302 and SFI approved harmonic damper
Forged pistons
Forged steel connecting rods
Hydraulic roller camshaft M-6250-E303, .498" lift intake and exhaust, duration at .050" is 220 degrees intake and exhaust
Double roller timing chain set M-6268-A302
Rear sump pan fits most Fox body cars
Ford Racing aluminum GT-40 cylinder heads M-6049-X306 with 1.94" intake valves and 1.54" exhaust valves
Roller rocker arms M-6564-B351
New block, oil and water pumps, oil pan
Can be used in kit cars, street rods, Mustangs, Fox-bodied cars, and trucks
Depending on your application, a crank pulley spacer, or a different timing cover, water pump, performance oil pan and pickup may be required. See installation notes