They will not work unfortunately. The intake elbow on a 94-95 car would interfere with the oil fill location on these valve covers. The only covers we offer for 1994-1995 are these, which you have to drill the oil fill hold in the valve cover: TFS-51400801
Answered by Clint D. from Waco | Comment 0 0
have a 93 cobra stock rockers with tfs stage 1 cam and tfs valve springs. Also stock cobra upper intake. Will these covers fit, do I need gaskets or do they come with and will I need to put a intake spacer on. Will it also fit with a stock hood. Thanks kevin.
Asked by Kevin A. from Chicago | Comment 0 0
These clear most rocker assemblies, I could not guarantee you 100% that you would not run into issues. You will need gaskets with these as well, you may need a 3/8 intake spacer to clear these. Usually the 3/8" fit under a stock Fox Body hood.
Answered by Jay W. from waco | Comment 0 0
I have the crane cams 1.7 rockers and my stock valve covers don't have enough
clearance I was wondering if these valve covers will give me the clearance I need and still give me space between my throttle cable as well. I have an edelbrock intake manifold installed as well. Idem # EDL-3821
Relay don't wanna buy valve covers just to find out ima have the same or more issues.
Asked by Arturo A. from merced | Comment 0 0
Arturo, These valve covers are likely to have the same clearance issues between the rockers and the intake. It may be necessary to run an intake spacer but with that you would have to check for hood clearance as well.
Answered by Tommy E. from Hewitt | Comment 0 0
Ford Mustang - 1986 (86) - 1987 (87) - 1988 (88) - 1989 (89) - 1990 (90) - 1991 (91) - 1992 (92) - 1993 (93)